欢迎登录材料期刊网

材料期刊网

高级检索

使用石英灯辐射加热器对C/C复合材料进行加热试验,分别用NiCr-NiSi热电偶及红外测温仪测量材料的背面温度,通过加热过程中的背面温度曲线,得到了材料的ελ-T图.结果表明:在1 123~1 273K情况下,ελ(λ=1.6μm)在0.93~0.87,随温度升高,C/C复合材料的光谱发射率ελ呈下降趋势.

参考文献

[1] 俞继军,马志强,姜贵庆,童秉纲.C/C复合材料烧蚀形貌测量及烧蚀机理分析[J].宇航材料工艺,2003(01):36-39.
[2] Dicristina V .Hyperthermal ablation performance of carbon-carbon composites.[AIAA71-416][R].
[3] Nestler D.E .High pressure arc test performance of Carbon-carbon nosetips.[AIAA77-771][R].
[4] Fitzer E .The future of carbon-carbon composites[J].Carbon,1987,25(01):163-168.
[5] Gajiwala H M .Hybridized resin matrix approach applied for development of carbon/carbon composites.[AIAA98-1902][R].
[6] 李贺军.炭/炭复合材料[J].新型炭材料,2001(02):79-80.
[7] 黄海明,杜善义,吴林志,王建新.C/C复合材料烧蚀性能分析[J].复合材料学报,2001(03):76-80.
[8] 赵建国,李克智,李贺军,席琛,翟言强.C/C复合材料比热容和热扩散率的研究[J].宇航材料工艺,2005(06):41-43.
[9] 张守阳,李贺军,孙军.C/C密度梯度材料的热学及力学性能研究[J].复合材料学报,2002(05):43-46.
[10] 于澍,刘根山,李溪滨,熊翔.炭/炭复合材料导热系数影响因素的研究[J].稀有金属材料与工程,2003(03):213-215.
[11] 赵建国,李克智,李贺军,李爱军,席琛.碳/碳复合材料导热性能的研究[J].航空学报,2005(04):501-504.
[12] Gginberg I M .Measurements of spectral and total emittance of reinforced carbon-carbon.[AIAA76-144][R].
[13] Caram J M;Ginberg I M .Emittance measurements of space shuttle orbiter reinforced carbon-carbon.[AIAA93-0841][R].
[14] 吕崇德.热工参数测量与处理[M].北京:清华大学出版社,2001:114-115.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%