简单介绍了z-pin的种类和复合材料z-pin的拉挤工艺.重点综述了利用热压罐和UAZ~R 两种z-pinning技术及z-pinning在复合材料层板、结构件连接及泡沫夹层复合材料中的应用,同时,提出了当前发展z-pinning技术的对策和建议.
In this paper, z-pins and its technology is briefly described. The technology of z-pinning by using of autoclave and UAZ~R method, and its application in composite laminates,joints and foam-cored sandwich panels are reviewed. Finally, some suggestions for developing z-pinning technology are put forward.
参考文献
| [1] | Mouritz A P;Bannister M K;Falzon P J et al.Review of applications for advanced three-dimensional fibre composites textile[J].Composites Part A:Applied Science and Manufacturing,1999,30(12):1445-1461. |
| [2] | Tong L;Mouritz A P;Bannister M K.3D fibre reinforced polymer composites[M].London:Elsevier,2002:205-218. |
| [3] | Stringer L G;Hiley M J.Through-thickness Reinforcement of composites:z-pinning,stitching,and 3 D weaving[A].San Diego,California,USA,2003 |
| [4] | Mouritz A P .Tensile fatigue properties of 3D composites with through-thickness[J].Composites Science and Technology,2008,68(12):2503-2510. |
| [5] | Tanzawa Y;Watanabe N;Ishikawa T .Interlaminar fracture toughness of 3-D orthogonal interlocked fabric composites[J].Com-posites Science and Technology,1999,59(08):1261-1270. |
| [6] | L. C. Dickinson;G. L. Farley;M. K. Hinders .Translaminar Reinforced Composites: A Review[J].Journal of Composites Technology & Research,1999(1):3-15. |
| [7] | 朱民儒.三维纺织复合材料的结构特点和应用[J].产业用纺织品,2002(06):1-5. |
| [8] | Freitas G;Magee C;Dardzinski P et al.Fiber insertion process for improved damage tolerance in aircraft laminates[J].Journal Advanced Material,1994,25(04):36-43. |
| [9] | 孙先念,郑长良.层合复合材料z-pinning增强技术的力学进展[J].航空学报,2006(06):1194-1202. |
| [10] | Freitas G;Dubbedy M .Joining aluminum materials using ultrasonic impactors[J].JOM-Journal of the Minerals Metals and Materials Society,1997,49(07):31-32. |
| [11] | Partridge I K;Cartie' D D R;Bonnington T.Manufacture and performance of z-pinned composites[A].Katz Boca Raton:CRC Press,2003:103-139. |
| [12] | Assessing the strength of Z-pinned composites[J].Aerospace engineering,2007(9):24-25. |
| [13] | Mouritz A P .Review of z-pinned composites laminates[J].Composites Part A:Applied Science and Manufacturing,2007,38(12):2383-2397. |
| [14] | 原永虎,肖军,李勇,谭永刚,刘林,党旭丹.X-cor夹层结构的制备及力学性能的初步探索[C].第十五届全国复合材料学术会议论文集,2008:623-627. |
| [15] | McBeath S .Safety pins[J].Racecar Engineering,2002,12:56-62. |
| [16] | Marasco A I.Analysis and evaluation of mechanical permance of reinforced sandwich struetures:X-Cor~(TM) and K-Cor~(TM)[M].London:Cranfield University,2005 |
| [17] | Huang S L;Richey R J;Desks E W.Cross reinforcement in a GR/EP laminate[A].San Francisco CA,1978 |
| [18] | Vaidya U K;Duncan B;Kopacz J.Affordable processing and characterization of multi-functional z-pin reinforced VARTM composites[A].北京,2001:214. |
| [19] | Cartie D D R;Partridge I K.Delamination behaviour of z-pinned laminates[A].France:Paris,1999 |
| [20] | David J B .The mechanics of z-fiber reinforcement[J].Computers ＆ Structures,1996,36(1-2):23-32. |
| [21] | Partridge I K;Cartie D D R .Delamination resistant laminates by z-fiber pinning Part,manufacture and fracture performmace[J].Composites Part A:Applied Science and Manufacturing,2005,36(01):55-64. |
| [22] | Huong T P N.Improvment of bearing strength of laminated composite by nanoelay and z-pin reinforcement[M].Sydney:School of Materials Science and EngineEring University of New South Wales,2006 |
| [23] | Thomas M;Fusco Medford;Constance Magee et al.Method and system for inserting reinforcing elements in a composite structure[P].USP 5 589 015,1996. |
| [24] | Chang P.The mechanical properties and failure mechanisms of z-pinned composites[M].Melbourne:RMIT University,2006 |
| [25] | Troulis E.Effect of Z-Fiber pinning on the mechanical properties of carbon fibre/epoxy composites[M].London:Cranfield university,2003 |
| [26] | Chang P;Mouritz A P;Cox B N .Flexural properties of zpinned laminates[J].Composites Part A:Applied Science and Manufacturing,2007,38(02):224-251. |
| [27] | Serge A .Impact on laminated composites:recent advances[J].Applied Mechanics Reviews,1994,47:517-544. |
| [28] | 韩立军,李铁虎,刘建军,邱海鹏,丁海英.采用Z-Pin增强体的3D炭/炭复合材料层间断裂行为[J].新型炭材料,2004(02):97-102. |
| [29] | Denis D.R. Cartie;Manos Troulis;Ivana K. Partridge .Delamination of Z-pinned carbon fibre reinforced laminates[J].Composites science and technology,2006(6):855-861. |
| [30] | 刘(韦华),矫桂琼,管国阳,常岩军.Z-pin增强陶瓷基复合材料拉伸和层间剪切性能[J].复合材料学报,2007(01):86-90. |
| [31] | Partridge I K;Cartie' D D R;Troulis M.Evaluating the mechanical effectiveness of z-pinning[A].Brisbane,2004 |
| [32] | Sweeting R D;Thomson R S .The effect of thermal mismatch on z-pinned laminated composite structures[J].Computers & Structures,2004,66(1-4):189-195. |
| [33] | 赵龙;高艳秋;黄蜂.Z向复合材料纤维增强对复合材料Ⅰ型层间断裂韧性影响研究[A].北京:航空工业出版社,2004 |
| [34] | Steeves CA;Fleck NA .In-plane properties of composite laminates with through-thickness pin reinforcement[J].International Journal of Solids and Structures,2006(10):3197-3212. |
| [35] | Liu H Y;Yan W Y;Yu X Y.Experimental study on zpin-ned DCB mode I delamination[A].Brisbane,2004 |
| [36] | Wenyi Yan;Hong-Yuan Liu;Yiu-Wing Mai .Mode Ⅱ delamination toughness of z-pinned laminates[J].Composites science and technology,2004(13/14):1937-1945. |
| [37] | 沃西源 .复合材料连接方法[J].航天返回与遥感,1997,18(04):31-39. |
| [38] | Freitas G;Fusco T;Campbell T.Z-Fibre technology and products for enhancing composite design[A].Florence,Italy,1996 |
| [39] | P. CHANG;A.P. MOURITZ;B.N. COX .Properties and failure mechanisms of pinned composite lap joints in monotonic and cyclic tension[J].Composites science and technology,2006(13):2163-2176. |
| [40] | 陶永强,矫桂琼.Z-pins增强陶瓷基复合材料单搭接接头的裂纹尖端能量释放率[J].应用力学学报,2008(02):347-350. |
| [41] | D. D. R. Cartie;G. Dell'Anno;E. Poulin .3D reinforcement of stiffener-to-skin T-joints by Z-pinning and tufting[J].Engineering Fracture Mechanics,2006(16):2532-2540. |
| [42] | Greenhalgh E;Lewis A;Bowen R et al.Evaluation of toughening concepts at structural features in CFRP-Part Ⅰ:Stiffener pull-off[J].Composites Part A:Applied Science and Manufacturing,2006,37(10):1521-1535. |
| [43] | Anon L K .Z-pins strengthen the super hornet,save weight and cost[J].The Integrator,2001,3:1-2. |
| [44] | 田旭,肖军,李勇.X-cor夹层结构试制与性能研究[J].飞机设计,2004(01):22-25. |
| [45] | Andrea I. Marasco;Denis D.R. Cartie;Ivana K. Partridge .Mechanical properties balance in novel Z-pinned sandwich panels: Out-of-plane properties[J].Composites, Part A. Applied science and manufacturing,2006(2):295-302. |
| [46] | 杜龙,矫桂琼,黄涛,赵龙,黄峰.X状Z-pin增强泡沫夹层结构的剪切性能[J].复合材料学报,2007(06):140-146. |
| [47] | O' Brien K T;Paris I L .Exploratory investigation of failure mechanisms in transition regions between solid laminates and X-cor truss sandwich[J].Computers & Structures,2002,57(1-4):189-204. |
| [48] | 刘林,李勇,肖军,齐俊伟,谭勇刚,原永虎.X-cor夹层芯材自动成型控制系统研究[C].第十五届全国复合材料学术会议论文集,2008:478-482. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%