综述了近年来真空导入模塑工艺树脂流动行为的研究进展,结合自己的研究成果系统地评述了真空导入模塑工艺中树脂的流动模型及机理、流动行为的数值模拟和流动行为的监测控制,并在此基础上对真空导入模塑工艺树脂流动行为的研究前景进行了展望.
The research progress of resin flow behavior in vacuum infusion molding process is reviewed. The flow mechanism of resin, the numerical simulation of resin flow behavior and control of the vacuum infusion molding process are discussed in detail. The study prospective of resin flow behavior in vacuum infusion molding process is proposed.
参考文献
| [1] | W. D. Brouwer;E. C. F. C. van Herpt;M. Labordus .Vacuum injection moulding for large structural applications[J].Composites, Part A. Applied science and manufacturing,2003(6):551-558. |
| [2] | 杨金水,肖加余,曾竟成,刘钧.真空导入模塑工艺树脂流动规律研究[J].宇航材料工艺,2007(05):22-26. |
| [3] | J. Summerscales;T. J. Searle .Low-pressure (vacuum infusion) techniques for moulding large composite structures[J].Proceedings of the Institution of Mechanical Engineers, Part L. Journal of Materials: Design and Application,2005(l1):45-58. |
| [4] | Zhu Yingdan;Tan Hua;Wang Jihui .Molding filling analysis in vacuum infusion molding process based on a high-permeable medium[J].武汉工业大学学报,2003,19(05):467-4471. |
| [5] | Correia N C;Robitaille F;Long A C .Analysis of the vacuum infusion moulding process:Ⅰ[J].Analytical formulation Composites Part A,2005,36:1 645-1 656. |
| [6] | Dong Chensong .Development of a process model for the vacuum assisted resin transfer molding simulation by the response surface method[J].Composites Part A:Applied Science and Manufacturing,2006,37:1 316-1 324. |
| [7] | 孔祥言.高等渗流力学[M].合肥:中国科学技术大学出版社,1999 |
| [8] | 伍晚滨;朱蒙生.工程流体力学[M].北京:化学工业出版社,2005 |
| [9] | 古托夫斯基T G.先进复合材料制造技术[M].北京:化学工业出版社,2004 |
| [10] | 拉德C D;朗A C;肯德尔K N.复合材料液体模塑成型技术[M].北京:化学工业出版社,2004 |
| [11] | 贝尔.多孔介质流体动力学[M].北京:中国建筑工业出版社,1998 |
| [12] | 李海晨 .树脂传递模塑工艺过程数值模拟与固化过程监测研究[D].哈尔滨工业大学,2002. |
| [13] | 戴福洪 .树脂传递模塑工艺有限元模拟与树脂流动过程监测[D].哈尔滨工业大学,2004. |
| [14] | Sun XD.;Lee LJ.;Li SJ. .Mold filling analysis in vacuum-assisted resin transfer molding. Part I: SCRIMP based on a high-permeable medium[J].Polymer Composites,1998(6):807-817. |
| [15] | Hammami A;Gebart B R.Experimental investigation of the vacuum infusion process[A].,1998 |
| [16] | Hammami A.Permeability assessment for the vacuum infusion molding process[A].,2001:ID-1059. |
| [17] | R.Mathur;D.Heider;C.Hoffmann;J.W.Gillespie;S.G.Advani;B.K.Fink .Flow Front Measurements and Model Validation in the Vacuum Assisted Resin Transfer Molding Process[J].Polymer Composites,2001(4):477-490. |
| [18] | 彭超义,曾竟成,肖加余,张长安,杜刚.RTM工艺数值模拟技术研究进展[J].宇航材料工艺,2003(04):1-5. |
| [19] | Yenilmez B;Senan M;Sozer E M .Variation of part thickness and compaction pressure in vacuum infusion process[J].Composites Science and Technology,2009,69(11-12):1 710-11 719. |
| [20] | Simacek P;Advani S G .Modeling resin flow and fiber tow satuation induced by distribution media collapse in vartm[J].Composites Science and Technology,2007,67(13):2 757-22 769. |
| [21] | Song Y S;Jeong T T.Computational analysis and simulation of vacuum infusion molding process[A].,2006:113-119. |
| [22] | Dhiren Modi;Nuno Correia;Michael Johnson .Active control of the vacuum infusion process[J].Composites. Part A, Applied science and manufacturing,2007(5):1271-1287. |
| [23] | Simon Bickerton;Hubert C. Stadtfeld;Karl V. Steiner .Design and application of actively controlled injection schemes for resin-transfer molding[J].Composites science and technology,2001(11):1625-1637. |
| [24] | Mogavero J;Sun JQ;Advani SG .A nonlinear control method for resin transfer molding[J].Polymer Composites,1997(3):412-417. |
| [25] | Lee C;Rice B;Buczek M.Resin transfer molding process monitoring and control[A].,1998:231-242. |
| [26] | Lynch K;Poursartip A;Hubert P .Use of a simple, inexpensive pressure sensor to measure hydrostatic resin pressure during processing of composite laminates[J].Polymer Composites,1999(4):581-593. |
| [27] | Vaidya U;Jadhav N;Hosur M et al.Assessment of flow and cure monitoring using direct current and alternating current sensing in vacuum assisted resin transfer molding[J].Smart Materials and Structures,2000,9(06):727-7736. |
| [28] | Bernstein J;Wagner J .Fiber optic sensors for use in monitoring flow front in vacuum resin transfer molding process[J].Review of Scientific Instruments,1997,68(05):2 156-2 157. |
| [29] | Nielsen D;Pitchumani R .Control of flow in resin transfer molding with real-time perform permeability estimation[J].Polymer Composites,2002,23(06):1 087-1 110. |
| [30] | D.R. Nielsen;R. Pitchumani .Closed-loop flow control in resin transfer molding using real-time numerical process simulations[J].Composites science and technology,2002(2):283-298. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%