在阐述次摆线参数方程的基础上,基于CAM/HSM技术,将次摆线走刀方式应用于窄槽结构的高速铣削试验中,研究了次摆线走刀的铣削力变化规律、窄槽结构的表面粗糙度及其局部形貌,并建立了次摆线走刀高速铣削窄槽结构的铣削力模型.研究表明:次摆线走刀高速铣削窄槽结构有效可行,加工出了高质量的窄槽型腔表面(Ra=0.142 μm);次摆线走刀的铣削力呈周期变化,在走刀平面内,次摆线切削宽度方向上的铣削力是进刀宽度方向上的4倍;采用次摆线走刀加环切走刀策略加工窄槽结构,既改善了窄槽的铣削加工条件,又满足了高速铣削粗精加工的要求和原则.
Trochoidal parametric equation was formulated. Based on CAM/HSM technology,Trochoidal tool path was applied to high speed milling slot experiments. Milling force, surface roughness and local surface morphology were measured ,observed and studied comprehensively. An analytical milling force model was defined depending on the study of milling force. The results indicated that trochoidal tool path in high speed milling slot is effective and feasible, and a high-quality slot surface (Ra =0. 142 μm) is obtained. The milling force of trochoidal tool path is varied period-ically. In the milling plane, the cutting force in trochoidal width direction is quadrupled to the width of trochoidal step ahead. Introduce circumferential cutting tool path to trochoidal peripherally, not only improved the slot of milling condi-tion, but also meet the high speed milling of rough milling and finishing requirement.
参考文献
| [1] | 中国科技促进发展研究中心.国家重点领域技术预测研究报告[M].北京:科学技术部发展计划司,1999 |
| [2] | 王保民.关于摆线特性的研究[J].机械科学与技术,2002(01):61-62. |
| [3] | 黄恺,李朝辉,苏铁明.数控摆线插补算法探讨[J].辽宁工学院学报（自然科学版）,2000(04):11-12,24. |
| [4] | 葛秀光,李佳,王丽萍,于会力.摆线在多边形零件加工中的应用[J].机床与液压,2005(02):45-47. |
| [5] | Trochoidal high speed machining[EB/OL].http://www.powermill.com/general/hsm.asp |
| [6] | High speed machining[EB/OL].http://www.plm.automation.siemens.com/en_us/products/nx/machining/machining/high_speed_machining.shtml |
| [7] | Spiral high speed machining[EB/OL].http://www.cimatron.com/general.aspx.FolderID = 38 & lang = en |
| [8] | Otkur M;Lazoglu I .Trochoidal milling[J].International Journal of Machine Tools and Manufacture,2007,47:1 324-1 332. |
| [9] | Matthieu Rauch;Emmanuel Due;Jean-Yves Hascoet .Improving trochoidal tool paths generation and implementation using process constraints modelling[J].International Journal of Machine Tools & Manufacture: Design, research and application,2009(6):375-383. |
| [10] | Mark Albert.The right start for a fine finish[J].Modern Machine Shop,2002:4. |
| [11] | 孙全平,廖文和.基于摆线的高速铣削刀轨生成算法研究[J].机械制造,2003(05):12-14. |
| [12] | 黄伯云.中国材料工程大典[A].北京:化学工业出版社,2006 |
| [13] | SANDVIK Coromill Plura for GC1620,GC1630,H10F[Z].,2007. |
| [14] | 刘胤,胡小秋.基于UG CAM的薄壁结构件高速铣削走刀策略研究[J].机床与液压,2008(05):248-250. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%