利用硅烷偶联剂对Al2O3颗粒进行表面改性,制备了Al2O3颗粒增强的TDE-85树脂基复合材料,研究了表面改性对其力学性能的影响,采用差热分析仪测定复合材料的固化反应温度,并计算了固化反应活化能.利用扫描电子显微镜分析了拉伸断口形貌.研究发现,当Al2O3用量为2wt%时,固化反应速度较快,硅烷偶联剂用量为4wt%时,冲击强度为13.2 kJ/m2;拉伸强度为65.2 MPa;弹性模量为2.66 GPa;最大伸长率为3.35%,此时对Al2O3颗粒的表面改性综合效果最好.
参考文献
| [1] | 李志君.中温固化环氧树脂复合材料基体的研究[J].热固性树脂,1997(01):25. |
| [2] | 陈伟明,王成忠,周同悦,杨小平.湿法缠绕用T800碳纤维复合材料基体研究[J].化工新型材料,2005(12):45-47. |
| [3] | Boey FYC.;Qiang W. .Experimental modeling of the cure kinetics of an epoxy-hexaanhydro-4-methylphthalicanhydride (MHHPA) system[J].Polymer: The International Journal for the Science and Technology of Polymers,2000(6):2081-2094. |
| [4] | 吴健伟,于昕,付刚,匡宏,付春明.甲基四氢苯酐中温固化低粘环氧树脂体系研究[J].化学与粘合,2001(04):160-161,167. |
| [5] | Chisholm N;Mahfuz H;Rangari V K et al.Fabrication and mechanical characterization of carbon/SiC-epoxy nanocomposites[J].Computers & Structures,2005,67:115-124. |
| [6] | Hyukjae Lee;Shankar Mall;Peng He;Donglu Shi;Suhasini Narasimhadevara;Yun Yeo-Heung;Vesselin Shanov;Mark J. Schulz .Characterization of carbon nanotube/nanofiber-reinforced polymer composites using an instrumented indentation technique[J].Composites, Part B. Engineering,2007(1):58-65. |
| [7] | Wu JT;Yang SY;Gao SQ;Hu AJ;Liu JG;Fan L .Preparation, morphology and properties of nano-sized Al2O3/polyimide hybrid films[J].European Polymer Journal,2005(1):73-81. |
| [8] | 刘振海.热分析导论[M].北京:化学工业出版社,1991 |
| [9] | 胡荣祖;史启祯.热分析动力学[M].北京:科学出版社,2001 |
| [10] | Pang K P;Gillham J K .Competition between cure and thermal degradation in a high Tg epoxy system:effect of time and temperature of isothermal cure on the glass transition temperature[J].Journal of Applied Polymer Science,1990,39:909-933. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%