针对现有雾中电火花加工过程中放电过程稳定性不足的问题,采用去离子水超声雾化及工件端施加辅助超声振动的方式以提高加工过程的稳定性.分别以自来水及纯水产生的雾介质为工作介质进行电火花加工对比实验,结果表明:以超声雾化方式获得的微细雾介质,可有效降低短路率.同时还进行了侧向喷雾加工试验,发现通过侧向喷雾,可以进一步提高加工过程的稳定性,获得更好的加工效果.
参考文献
[1] | 赵万生;刘晋春.实用电加工技术[M].北京:机械工业出版社,2002:18. |
[2] | Fabio N. Leao;Ian R. Pashby .A review on the use of environmentally-friendly dielectric fluids in electrical discharge machining[J].Journal of Materials Processing Technology,2004(1/3):341-346. |
[3] | King W;Klocke F.EDM-sinking using water-based dielectrics and electropolishing-a new manufacturing sequence in tool-making[A].Lausanne,Switzerland,1995:225-234. |
[4] | Dünnebacke G.High performance electrical discharge machining using a water-based dielectric[A].Magdeburg,Germany,1992:170-182. |
[5] | Leao F N;Pashby I R .A review of environmentally-friendly dielectric fluids in electrical discharge maching[J].Journal of Materials Processing Technology,2004,149(1-3):341-346. |
[6] | Masanori Kunieda;Masahiro Yoshida .Electrical discharge machining in gas[J].CIRP Annals,1997(1):143-146. |
[7] | 李立青,王振龙,赵万生.气体放电加工机理分析[J].哈尔滨工业大学学报,2004(03):359-362. |
[8] | 王彤,陈玉全,国枝正典.气中电火花线切割加工技术研究[J].机械工程学报,2003(08):76-80. |
[9] | Zhang Q H;Zhang J H;Deng J X et al.Ultrasonic vibration electrical discharge machining in gas[J].Journal of Materials Processing Technology,2002,29(1/3):123-138. |
[10] | Tanimura T;Isuzugawa K;Fujita I.Development of EDM in the Mist[A].,1989:313-316. |
[11] | 曹建明.喷雾学[M].北京:机械工业出版社,2005:182. |
[12] | Tao, J;Shih, AJ;Ni, J .Experimental study of the dry and near-dry electrical discharge milling processes[J].Journal of manufacturing science and engineering,2008(1):11002-1-11002-9-0. |
[13] | Kao C C;Tao J;Shih A J.Water mist near dry wire and drilling electrical discharge machining and gap distance modeling[A].,2007:280-286. |
[14] | 顾琳,赵万生,张志华,康小明.喷雾电火花铣削加工及其机理的分析[J].电加工与模具,2006(02):1-4. |
[15] | 李利,顾琳,夏永高,赵万生.内喷雾式电火花铣削加工的实验研究[J].上海交通大学学报,2007(10):1569-1572. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%