欢迎登录材料期刊网

材料期刊网

中国科学院金属研究所 科学出版社
高级检索
  1. 首页
  2. 期刊
  3. 宇航材料工艺
  4. 纤维增强复合材料双轴强度研究进展

宇航材料工艺 , 2014, 44(4): 11-18. doi: 10.3969/j.issn.1007-2330.2014.04.002

纤维增强复合材料双轴强度研究进展

蔡登安 1, , 周光明 2, , 王新峰 3, , 黄翔 4, , 曹然 5,

1.南京航空航天大学机械结构力学及控制国家重点实验室,南京,210016

2.南京航空航天大学机械结构力学及控制国家重点实验室,南京,210016

3.南京航空航天大学机械结构力学及控制国家重点实验室,南京,210016

4.南京航空航天大学机械结构力学及控制国家重点实验室,南京,210016

5.南京航空航天大学机械结构力学及控制国家重点实验室,南京,210016

基金项目:   江苏省高校优势学科建设工程项目资助   南京航空航天大学研究生创新基地开放基金项目(kfjj130104)  

关键词： 纤维增强复合材料 , 双轴强度 , 强度准则 , 实验方法

A Review of Biaxial Strength of Fiber Reinforced Composite Materials

Keywords： Fiber reinforced composites , Biaxial strength , Strength criteria , Experimental methods

先对纤维增强复合材料双轴强度理论研究进行了简单的回顾,可将失效准则是否区分破坏模式分为两类,并且比较了各强度准则的特点与存在的问题.然后对纤维增强复合材料双轴加载实验装置的发展作了概括,对目前常用的复合材料双轴加载试样类型进行了总结分析,指出了双轴加载试样设计要求及各试样类型的优缺点.最后,对纤维增强复合材料的双轴强度研究进行了简要评述与展望.

参考文献

[1] 杜善义.先进复合材料与航空航天[J].复合材料学报,2007(01):1-12.
[2] 刘代军,陈亚莉.先进树脂基复合材料在航空工业中的应用[J].材料工程,2008(z1):194-198.
[3] Soutis C .Fibre reinforced composites in aircraft construction[J].Progress in Aerospace Sciences,2005,41(2):143-151,2005.
[4] Huda Z,Edi P .Materials selection in design of structures and engines of supersonic aircrafts:a review[J].Materials & Design,2013,46
[5] Hinton M J,Kaddour A S,Soden P D.Failure criteria in fiber reinforced polymer composites:the world-wide failure exercise[M].Access online via Elsevier,2004,2004.
[6] Soden P D,Leadbetter D,Griggs P R,et al .The strength of a filament wound composite under biaxial loading[J].Composites,1978,9(4):247-250,1978.
[7] Toombes G R,Swanson S R,Cairns D S .Biaxial testing of composite tubes[J].Experimental Mechanics,1985,25(2):186-192,1985.
[8] Arnold W S,Robb M D,Marshall I H .Failure envelopes for notched CSM laminates under biaxial loading[J].Composites,1995,26(11):739-747,1995.
[9] Thom H .A review of the biaxial strength of fibre-reinforced plastics[J].Composites Part A:Applied Science and Manufacturing,1998,29(8):869-886,1998.
[10] Moreno S,López Cela J J .Failure envelope under biaxial tensile loading for chopped glass-reinforced polyester composites[J].Composites Science and Technology,2011,72(1):91-96,2011.
[11] Moreno S,Martínez Vicente J L,López Cela J J .Failure strain and stress fields of a chopped glass-reinforced polyester under biaxial loading[J].Composite Structures,2013,103
[12] 谢仁华.复合材料双向应力实验述评[J].宇航材料工艺,1991(1):12-18,1991.
[13] 付求舟,王兴业.双向拉伸载荷作用下层合板强度的实验研究[J].宇航材料工艺,1994(4):22-26,1994.
[14] 周光明,陆晓华,许正辉.细编穿刺3D碳/碳复合材料双向拉伸实验研究[J].南京理工大学学报（自然科学版）,2007(03):390-393.
[15] 罗以喜.双向载荷下双轴向经编柔性复合材料有限元模拟[J].纺织学报,2011(12):60-63.
[16] Azzi V D,Tsai S W .Anisotropic strength of composites[J].Experimental Mechanics,1965,5(9):283-288,1965.
[17] Fan W .On phenomenological anisotropic failure criteria[J].Composites Science and Technology,1987,28(4):269-278,1987.
[18] Hoffman O .The brittle strength of orthotropic materials[J].Journal of Composite Materials,1967,1(2):200-206,1967.
[19] Franklin H G .Classic theories of failure of anisotropic materials[J].Fibre Science and Technology,1968,1(2):137-150,1968.
[20] Tsai S W,Wu E M .A general theory of strength for anisotropic materials[J].Journal of Composite Materials,1971,5(1):58-80,1971.
[21] 沈观林,胡更开.复合材料力学[M].北京:清华大学出版社,2006,2006.
[22] Tsai S W,Hahn H T.Introduction to composite materials[M].Westport:Technomic Publishing Co.,1980,1980.
[23] Wu E M,Scheublein J K.Laminate strength-a direct characterization procedure[C].Composite Materials:Testing and Design (Third Conference),ASTM STP 546,American Society for Testing and Materials,1974:188-206,1974.
[24] Camanho P P.Failure criteria for fibre-reinforced polymer composites[M].DEMEGI,FEUP,2002:1-13,2002.
[25] Jenkin C F.Report on materials used in the construction of aircraft and aircraft engines[R].HM Stationery Office,London,1920:95-131,1920.
[26] Jones R M.Mechanics of composite materials[M].London:Taylor & Francis,1975,1975.
[27] Hashin Z,Rotem A .A fatigue failure criterion for fiber reinforced materials[J].Journal of composite materials,1973,7(4):448-464,1973.
[28] Haszin Z .Failure criteria for unidirectional fiber composites[J].Journal of Applied Mechanics,1980,47(2):329-334,1980.
[29] Puck A,Schürmann H .Failure analysis of FRP laminates by means of physically based phenomenological models[J].Composites Science and Technology,1998,58(7):1045-1067,1998.
[30] 钱元,周光明,蔡登安,刘伟先.双轴向纤维增强复合材料层合板强度准则[J].南京航空航天大学学报,2013(02):179-185.
[31] 任家陶,李冈陵,豆志武,赖伟栋.双向拉伸试验的进展与钛板双向拉伸的强化研究[J].实验力学,2001(02):196-206.
[32] Bhatnagar N,Bhardwaj R,Selvakumar P,et al .Development of a biaxial tensile test fixture for reinforced thermoplastic composites[J].Polymer Testing,2007,26(2):154-161,2007.
[33] Antoniou A E,Kensche C,Philippidis T P .Mechanical behavior of glass/epoxy tubes under combined static loading.Part Ⅰ:Experimental[J].Composites Science and Technology,2009,69(13):2241-2247,2009.
[34] Smits A,Van Hemelrijck D,Philippidis T P,et al .Design of a cruciform specimen for biaxial testing of fibre reinforced composite laminates[J].Composites Science and Technology,2006,66(7):964-975,2006.
[35] Whitney J M,Daniel I M,Pipes R B.Experimental mechanics of fiber reinforced composite materials[M].Society for Experimental Stress Analysis,1982,1982.
[36] Pipes R B,Cole B W .On the off-axis strength test for anisotropic materials1[J].Journal of Composite Materials,1973,7(2):246-256,1973.
[37] Pipes R B,Pagano N J .Interlaminar stresses in composite laminates under uniform axial extension[J].Journal of Composite Materials,1970(4):538-548,1970.
[38] Daniel I M .Behavior of graphite/epoxy plates with holes under biaxial loading[J].Experimental Mechanics,1980,20(1):1-8,1980.
[39] Arcan M,Hashin Z,Voloshin A .A method to produce uniform plane-stress states with applications to fiber-reinforced materials[J].Experimental Mechanics,1978,18(4):141-146,1978.
[40] Marloff R H .Finite element analysis of biaxial stress test specimen for graphite/epoxy and glass fabric/epoxy composites[J].Composite Materials:Testing and Design,1982,787
[41] Rizzo R R,Vicario A A .A finite element analysis of laminated anisotropic tubes:(Part Ⅰ-A characterization of the off-axis tensile specimen)[J].Journal of Composite Materials,1970,4(3):344-359,1970.
[42] Soden P D,Hinton M J,Kaddour A S .Biaxial test results for strength and deformation of a range of E-glass and carbon fibre reinforced composite laminates:failure exercise benchmark data[J].Composites Science and Technology,2002,62(12):1489-1514,2002.
[43] Majid A,Assaleh T A,Gibson A G,et al .Ultimate elastic wall stress (UEWS) test of glass fibre reinforced epoxy (GRE) pipe[J].Composites Part A:Applied Science and Manufacturing,2011,42(10):1500-1508,2011.
[44] Antoniou A E,Van Hemelrijck D,Philippidis T P .Failure prediction for a glass/epoxy cruciform specimen under static biaxial loading[J].Composites Science and Technology,2010,70(8):1232-1241,2010.
[45] Makris A,Vandenbergh T,Ramault C,et al .Shape optimisation of a biaxially loaded cruciform specimen[J].Polymer Testing,2010,29(2):216-223,2010.
[46] Lamkanfi E,Van Paepegem W,Degrieck J,et al .Strain distribution in cruciform specimens subjected to biaxial loading conditions.Part 1:Two-dimensional versus three-dimensional finite element model[J].Polymer Testing,2010,29(1):7-13,2010.
[47] 贾永刚,张为华,张炜.固体推进剂双向拉伸试件优化设计及试验[J].推进技术,2011(05):737-740.
[48] 许承海,孟松鹤,齐菲,胡江华,宋乐颖.三维机织碳／碳复合材料双轴压缩载荷下的力学行为[J].复合材料学报,2012(06):206-211.
[49] Sun X S,Haris A,Tan V B C,et al .A multi-axial fatigue model for fiber-reinforced composite laminates based on Puck's criterion[J].Journal of Composite Materials,2012,46(4):449-469,2012.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
作者相关
文章评分
  • 您的评分：
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%

版权所有©2010中国科学院金属研究所中国科技出版传媒股份有限公司

本系统由北京仁和汇智信息技术有限公司设计开发

技术支持：info@rhhz.net