采用等离子脉冲烧结(SPS)进行了多孔铝块体材料的制备.结果表明采用该方法在350℃时可以制备出结构与尺寸可控性好、粉体颗粒无明显长大、孔隙率(54.07％)较高的多孔金属铝块体材料.该制备方法对于开孔性与颗粒连接性要求较高的多孔金属材料具有较高的技术优势.
参考文献
| [1] | Degischer H P .Innovative light metals:metal matrix composites and foamed aluminium[J].Materials and Design,1997,18(4/6):221-226. |
| [2] | John Banhart .Manufacture, characterization and application of cellular Metals and metal foams[J].Progress in materials science,2001(6):559-632. |
| [3] | 刘培生.多孔材料引论[M].北京:清华大学出版社,2004:122. |
| [4] | 许庆彦;陈玉勇;李庆春 .多孔铝合金的铸造工艺研究[J].材料科学与工艺,1998,6(1):36-40. |
| [5] | R. Surace;L.A.C. De Filippis;A.D. Ludovico;G. Boghetich .Influence of processing parameters on aluminium foam produced by space holder technique[J].Materials & design,2009(6):1878-1885. |
| [6] | 王永进,陈策,何德坪.热处理对多孔铝合金压缩吸能性能的影响[J].金属热处理,2002(08):3-6. |
| [7] | Arbuzova L A;Shmakov Y V;Zenina M V et al.Foamed aluminum as the new prospective material for air-planes,automobiles and ship[J].Tsveth.Met,1997,2:62-65. |
| [8] | R. GOODALL;J.-F. DESPOIS;A. MARMOTTANT .The Effect of Preform Processing on Replicated Aluminium Foam Structure and Mechanical Properties[J].Scripta materialia,2006(12):2069-2073. |
| [9] | Y. P. Jeon;C. G. Kang;S. M. Lee .Effects of cell size on compression and bending strength of aluminum-foamed material by complex stirring in induction heating[J].Journal of Materials Processing Technology,2009(1):435-444. |
| [10] | 赵增典;张勇 .泡沫铝合金的制备方法及性能测试[J].山东工程学院学报,1997,11(1):62-64. |
| [11] | Degischer H P;Kriszt B.多孔泡沫金属[M].北京:化学工艺出版社,2005:12. |
| [12] | B. Jiang;N.Q. Zhao;C.S. Shi .A novel method for making open cell aluminum foams by powder sintering process[J].Materials Letters,2005(26):3333-3336. |
| [13] | Meng Li;Ying Liu;Guangda Lu;Jinwen Ye;Jun Li;Minjing Tu .Preparation and dynamic deuterium gas loading of highly porous palladium bulks[J].International journal of hydrogen energy,2007(18):5033-5038. |
| [14] | 张东明,傅正义.放电等离子加压烧结（SPS）技术特点及应用[J].武汉工业大学学报,1999(06):15-17. |
| [15] | 傅博;李盛荣 .碳化硼陶瓷材料密度的控制方法与应用[J].辽宁工学院学报,1997,17(2):44-47. |
| [16] | 唐涛.形态对钯-氢体系热力学性质的影响[J].稀有金属材料与工程,2005(05):826-829. |
| [17] | 日本助友石炭公司 .SPS-1050使用手册[Z].,2003. |
| [18] | Wang K;Fu ZY;Wang WM;Wang YC;Zhang JY;Zhang QJ .Study on fabrication and mechanism in of porous metals by spark plasma sintering[J].Journal of Materials Science,2007(1):302-306. |
| [19] | Khor KA.;Yu LG.;Andersen O.;Stephani G. .Effect of spark plasma sintering (SPS) on the microstructure and mechanical properties of randomly packed hollow sphere (RHS) cell wall[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):130-135. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%