利用自冲铆连接系统、材料试验机及扫描电子显微镜等设备来研究钛合金、铝锂合金及铝合金自冲铆接头的力学性能与静态失效机理.结果表明:TA1钛合金接头平均最大拉剪载荷(6 285.0 N)在3种接头中最大,8090铝锂合金接头(5 478.3 N)次之,5052铝合金接头(3 217.7 N)最小;不同金属材料自冲铆接头的静态失效模式有很大的区别,TA1钛合金接头出现铆钉从沿晶断裂向韧性断裂转变的失效过程,8090铝锂合金接头出现材料被擦伤与解理断裂的失效过程,5052铝合金接头仅出现材料被擦伤的失效过程.
参考文献
| [1] | 陈勇,蒋炳炎,周志平,湛建平.飞机钛合金构件热损伤检测试验[J].宇航材料工艺,2007(05):75-77. |
| [2] | B. P. Kashyap;M. C. Chaturvedi .Superplastic behaviour of annealed AA 8090 Al-Li alloy[J].Materials Science and Technology: MST: A publication of the Institute of Metals,2003(10):1369-1378. |
| [3] | He Xiaocong;Xing Baoying;Zeng Kai et al.Numerical and experimental investigations of self-piercing riveting[J].International Journal of Advanced Manufacturing Technology,2013,69(1-4):715. |
| [4] | Xing Baoying;He Xiaocong;Wang Yuqi et al.Study of mechanical properties for copper alloy H62 sheets joined by selfpiercing riveting and clinching[J].Journal of Materials Processing Technology,2014,216:28. |
| [5] | Xing Baoying;He Xiaocong;Zeng Kai et al.Mechanical properties of self-piercing riveted joints in aluminum alloy 5052[J].International Journal of Advanced Manufacturing Technology,2014,75(1/4):351. |
| [6] | 邢保英 .自冲铆连接机理及力学性能研究[D].昆明:昆明理工大学机电工程学院,2014. |
| [7] | Pickin C G;Young K;Tuersley I .Joining of lightweight sandwich sheets to aluminum using self-piercing riveting[J].Materials and Design,2007,28(8):2361. |
| [8] | 邢保英,何晓聪,唐勇,许静楠,曾凯.自冲铆成形机理及静力学性能分析[J].材料导报,2013(02):135-138,145. |
| [9] | He Xiaocong .Coefficient of variation and its application to strength prediction of self-piercing riveted joints[J].Scientific Research and Essays,2011,6(34):6850. |
| [10] | 何晓聪;何家宁;柯建宏 等.自冲铆接头的质量评价及强度可靠性预测[J].湖南大学学报,2010,37(12):1. |
| [11] | He Xiaocong;Pearson I;Young K .Self-pierce riveting for sheet materials:state of the art[J].Journal of Material Processing Technology,2008,199(1/3):27. |
| [12] | 邓成江,何晓聪,邢保英,曾凯,丁燕芳.基于试验的自冲铆接头失效机理分析[J].热加工工艺,2013(17):220-223. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%