采用试验方法研究了铝锂合金(1420)和钛合金(TA1)同种压印接头及这两种材料组合的异种压印接头的力学性能,以接头的承载以及缓冲抗震能力作为评价接头质量的两个主要标准,经实验得到每组接头的载荷-位移曲线和能量吸收直方图间接得出压印接头的承载以及缓冲抗震能力.由实验结果可知,表征接头的承载以及缓冲抗震能力的载荷-位移曲线和能量吸收直方图均表明TA1-1420接头的力学性能相较于其他接头好,且与TA1-TA1接头相比,作为下板的1420密度较小,TA1-1420组的压印接头质量更轻.TA1-1420接头更适用于对于承载和缓冲抗震要求较高的部件.
参考文献
| [1] | 祁桂根,池海丰,李秀华.1420铝锂合金板材成形性能试验研究[J].沈阳航空工业学院学报,2002(03):12-14. |
| [2] | Lambiasen F;Ilio A D .An experimental study on clinched joints realized with different dies[J].Thin-Walled Structures,2014,85:71-80. |
| [3] | Coppieters S P;Lava S;Baes H et al.Analytical method to predict the pull-out strength of clinched connections[J].ThinWalled Structures,2012,52:42-52. |
| [4] | Ho-Kyung Kim .Fatigue Strength Evaluation of the Clinched Lap Joints of a Cold Rolled Mild Steel Sheet[J].Journal of Materials Engineering and Performance,2013,22:294-299. |
| [5] | He Xiaocong;Liu Fulong;Xing Baoying .Numerical and Experimental Investigations of Extensible Die Clinching International[J].Journal of Advanced Manufacturing Technology,2014,74:1229-1236. |
| [6] | He Xiaocong;Zhao Lun;Yang Huiyan .Investigations of strength and energy absorption of clinched joints[J].COMPUTATIONAL MATERIALS SCIENCE,2014,94:58-65. |
| [7] | He Xiaocong;Zhang Yue;Xing Baoying .Mechanical properties of extensible die clinched joints in titanium sheet materials[J].Materials and Design,2015,71:26-35. |
| [8] | 杨慧艳,何晓聪,周森,丁燕芳.压印接头拉剪强度的有限元模拟[J].机械工程材料,2013(09):74-78. |
| [9] | 杨慧艳,何晓聪,丁燕芳,周森.铜合金同种和异种板材压印连接研究[J].热加工工艺,2014(07):34-36,40. |
| [10] | 材料属性对压印及其复合接头性能的影响[J].热加工工艺,2014(11):162-165. |
| [11] | 郑俊超,何晓聪,许竞楠,曾凯,丁燕芳.不同材料压印接头的拉剪性能和疲劳性能[J].机械工程材料,2014(01):52-55,89. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%