欢迎登录材料期刊网

材料期刊网

中国科学院金属研究所 科学出版社
高级检索
  1. 首页
  2. 期刊
  3. 宇航材料工艺
  4. 树脂基纤维复合材料钻削研究进展

宇航材料工艺 , 2016, 46(5): 22-28. doi: 10.3969/j.issn.1007-2330.2016.05.004

树脂基纤维复合材料钻削研究进展

伍俏平 1, , 刘平 2, , 邓朝晖 3,

1.难加工材料高效精密加工湖南省重点实验室,湖南科技大学,湘潭411201

2.难加工材料高效精密加工湖南省重点实验室,湖南科技大学,湘潭411201

3.难加工材料高效精密加工湖南省重点实验室,湖南科技大学,湘潭411201

基金项目:   国家自然科学基金资助项目(51575179,51205126)   湖南省自然科学基金青年人才联合培养项目(12JJB006)  

关键词： 树脂基纤维复合材料 , 钻削性能 , 钻削机理 , 钻削工艺

Progress and Prospect on Drilling of Resin Matrix Fiber-Reinforced Composites

Keywords： Resin matrix fiber-reinforced composite , Drilling performance , Drilling mechanism , Drilling technique

主要介绍了树脂基纤维复合材料钻削过程中的钻削力、钻削温度、加工表面质量等钻削性能及材料去除机理、缺陷形成机理、刀具磨损机理等钻削机理方面的研究现状;阐述了树脂基纤维复合材料钻削工艺及钻头改进方面的最新研究进展,并对树脂基纤维复合材料钻削加工技术的下一步研究重点进行了展望.

参考文献

[1] 陈祥宝;张宝艳;邢丽英.先进树脂基复合材料技术发展及应用现状[J].中国材料进展,2009(6):2-12.
[2] 李桂玉;汪海晋;孙杰;李剑峰;李卫东.基于复合材料钻削缺陷容差值的工艺参数优化[J].复合材料学报,2014(4):1022-1029.
[3] A. Langella;L. Nele;A. Maio.A torque and thrust prediction model for drilling of composite materials[J].Composites, Part A. Applied science and manufacturing,20051(1):83-93.
[4] 郑伟 .玻璃纤维夹层复合材料钻削技术研究[D].哈尔滨工业大学,2014.
[5] Redouane Zitoune;Francis Collombet.Numerical prediction of the thrust force responsible of delamination during the drilling of the long-fibre composite structures[J].Composites, Part A. Applied science and manufacturing,20073(3):858-866.
[6] C. C. Tsao;H. Hocheng.The effect of chisel length and associated pilot hole on delamination when drilling composite materials[J].International Journal of Machine Tools & Manufacture: Design, research and application,200311(11):1087-1092.
[7] Wen-Chou Chen.Some experimental investigations in the drilling of carbon fiber-reinforced plastic (CFRP) composite laminates[J].International Journal of Machine Tools & Manufacture: Design, research and application,19978(8):1097-1108.
[8] 王明海;孙国强;孙越.小角度螺旋槽钻头加工复合材料的模拟研究[J].制造技术与机床,2012(12):182-185.
[9] C. C. Tsao;H. Hocheng.Evaluation of thrust force and surface roughness in drilling composite material using Taguchi analysis and neural network[J].Journal of Materials Processing Technology,20081/3(1/3):342-348.
[10] 张厚江;樊锐;陈五一;陈鼎昌.高速钻削碳纤维复合材料钻削力的研究[J].航空制造技术,2006(12):76-79,82.
[11] I. S. Shyha;D. K. Aspinwall;S. L. Soo;S. Bradley.Drill geometry and operating effects when cutting small diameter holes in CFRP[J].International Journal of Machine Tools & Manufacture: Design, research and application,200912/13(12/13):1008-1014.
[12] Navid Zarif Karimi;Hossein Heidary;Giangiacomo Minak;Mehdi Ahmadi.Effect of the drilling process on the compression behavior of glass/epoxy laminates[J].Composite structures,2013Apr.(Apr.):59-68.
[13] 鲍永杰;高航;梁延德;朱国平.碳纤维/环氧树脂复合材料钻削温度场建模与试验[J].兵工学报,2013(7):846-852.
[14] Vijayan Krishnaraj;A. Prabukarthi;Arun Ramanathan;N. Elanghovan;M. Senthil Kumar;Redouane Zitoune;J.P. Davim.Optimization of machining parameters at high speed drilling of carbon fiber reinforced plastic (CFRP) laminates[J].Composites, Part B. Engineering,20124(4):1791-1799.
[15] 赵建设.碳纤维复合材料钻削温度测试与分析[J].宇航材料工艺,2000(05):49-52.
[16] 彭思泽;李鹏南;唐思文;张帅;邱新义.钻削碳纤维复合材料刀具磨损与加工质量的研究[J].制造技术与机床,2015(7):45-49.
[17] Chung-Shin Chang;Li-Ran Hwang;Wen-Jen Hsue.A Study of Cutting Temperatures in Turning of Glass Fiber Reinforced Plastics Materials[J].Materials Science Forum,20080(0):193-213.
[18] R. Zitoune;F. Collombet;F. Lachaud.Experiment-calculation comparison of the cutting conditions representative of the long fiber composite drilling phase[J].Composites science and technology,20053/4(3/4):455-466.
[19] 朱国平 .单向C/E复合材料钻削温度场研究[D].大连理工大学,2013.
[20] 陈浩;李鹏南;唐思文;邱新义.麻花钻几何参数对碳纤维复合材料钻削性能的影响[J].宇航材料工艺,2015(3):63-67.
[21] Rahme, P.;Landon, Y.;Lachaud, F.;Piquet, R.;Lagarrigue, P..Delamination-free drilling of thick composite materials[J].Composites, Part A. Applied science and manufacturing,2015:148-159.
[22] 张厚江;陈五一;陈鼎昌.碳纤维复合材料钻削孔分层缺陷的研究[J].中国机械工程,2003(22):1978-1980.
[23] Nasir, A. A. Abdul;Azmi, A. I.;Khalil, A. N. M..Measurement and optimisation of residual tensile strength and delamination damage of drilled flax fibre reinforced composites[J].Measurement,2015:298-307.
[24] 李桂玉;李剑峰;孙杰;李卫东.硬质合金钻头钻削碳纤维增强复合材料工艺[J].粉末冶金材料科学与工程,2010(6):580-585.
[25] 林伟;涂俊翔.高速钻削复合材料加工参数对粗糙度影响研究[J].合肥工业大学学报（自然科学版）,2015(1):11-14,78.
[26] 张厚江;陈五一;陈鼎昌.碳纤维复合材料切削机理的研究[J].航空制造技术,2004(7):57-59.
[27] 鲍永杰,高航.碳纤维复合材料构件加工缺陷与高效加工对策[C].SAMPE CHINA 2009暨中国国际先进材料与工艺技术学术研讨会论文集,2009:254-259.
[28] 温泉 .C/E复合材料制孔损伤形成机理与评价方法研究[D].大连理工大学,2014.
[29] 李志强;樊锐;陈五一;陈鼎昌.纤维增强复合材料的机械加工技术[J].航空制造技术,2003(12):34-37.
[30] Zenia, S.;Ben Ayed, L.;Nouari, M.;Delameziere, A..Numerical prediction of the chip formation process and induced damage during the machining of carbon/epoxy composites[J].International Journal of Mechanical Sciences,2015:89-101.
[31] Sanjay Rawat;Helmi Attia.Wear mechanisms and tool life management of WC-Co drills during dry high speed drilling of woven carbon fibre composites[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2009Pt.2(Pt.2):1022-1030.
[32] 赵建设;李仲平.碳/环氧复合材料钻孔刀具磨损机理研究[J].宇航材料工艺,2006(2):68-70.
[33] Ali Faraz;Dirk Biermann;Klaus Weinert.Cutting edge rounding: An innovative tool wear criterion in drilling CFRP composite laminates[J].International Journal of Machine Tools & Manufacture: Design, research and application,200915(15):1185-1196.
[34] Cadorin, Nicolas;Zitoune, Redouane.Wear signature on hole defects as a function of cutting tool material for drilling 3D interlock composite[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2015:742-751.
[35] 徐锦泱;蔡晓江;魏莹莹;安庆龙;陈明.高强度型T800S/250F CFRP的制孔缺陷研究[J].制造技术与机床,2013(3):97-101.
[36] 温泉;郭东明;高航;王奔.基于划痕试验的碳纤维/环氧树脂复合材料制孔毛刺与撕裂缺陷形成机制[J].复合材料学报,2014(1):9-17.
[37] 李桂玉 .叠层复合材料钻削加工缺陷产生机理及工艺参数优化[D].山东大学,2011.
[38] L.M.P. Durao;M.F.S.F. de Moura;A.T. Marques.Numerical prediction of delamination onset in carbon/epoxy composites drilling[J].Engineering Fracture Mechanics,20089(9):2767-2778.
[39] 刘汉良;张加波;王震;张佳朋;李光.碳纤维与芳纶纤维复合材料机械加工刀具选用[J].宇航材料工艺,2013(4):95-98,117.
[40] Redouane Zitoune;Mohamed El Mansori;Vijayan Krishnaraj.Tribo-functional design of double cone drill implications in tool wear during drilling of copper mesh/CFRP/woven ply[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,20131/2(1/2):1560-1567.
[41] Ozden Isbilir;Elaheh Ghassemieh.Numerical investigation of the effects of drill geometry on drilling induced delamination of carbon fiber reinforced composites[J].Composite structures,2013Nov.(Nov.):126-133.
[42] C. C. Tsao;Y. C. Chiu.Evaluation of drilling parameters on thrust force in drilling carbon fiber reinforced plastic (CFRP) composite laminates using compound core-special drills[J].International Journal of Machine Tools & Manufacture: Design, research and application,20119(9):740-744.
[43] 李凤全 .碳纤维复合材料制孔缺陷及对策的试验研究[D].大连理工大学,2008.
[44] 贺虎;苏宏华;陈燕;牟娟;王巍.碳纤维复合材料钻削加工对比试验[J].航空制造技术,2011(14):52-54.
[45] 庄原 .芳纶纤维复合材料切磨复合加工技术研究[D].大连理工大学,2013.
[46] 王奔 .切削力和热对C/E复合材料制孔损伤的影响机理[D].大连理工大学,2014.
[47] Li, Nanya;Li, Yingguang;Zhou, Jing;He, Yongxi;Hao, Xiaozhong.Drilling delamination and thermal damage of carbon nanotube/carbon fiber reinforced epoxy composites processed by microwave curing[J].International Journal of Machine Tools & Manufacture: Design, research and application,2015:11-17.
[48] 蔡闻峰;周惠群;何颖;李河清.树脂基碳纤维复合材料制孔缺陷及其钻削工艺研究[J].工程塑料应用,2005(10):32-34.
[49] 金浩;程寓;高超;宋中权.玻璃钢复合材料夹层结构钻削试验研究[J].机械设计与制造,2011(4):133-135.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
作者相关
文章评分
  • 您的评分：
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%

版权所有©2010中国科学院金属研究所中国科技出版传媒股份有限公司

本系统由北京仁和汇智信息技术有限公司设计开发

技术支持：info@rhhz.net