通过金相观察(OM)、扫描电镜(SEM)以及拉伸测试系统地表征和研究了热处理对砂型铸造Mg-Gd-Y合金微观组织和力学性能的影响.研究表明:固溶态GW94、GW74、GW44合金主要由α-Mg过饱和固溶体、铸态残留相Mg5(Gd,Y)以及固溶过程形成的方块相组成.随着Gd含量的增加,固溶态Mg-Gd-Y合金中方块相的体积分数不断增加;在同一时效温度下,合金达到时效峰值的时效时间缩短;室温下拉伸的固溶态、时效峰值态合金以及200和250℃下拉伸的时效峰值态合金的抗拉强度和屈服强度不断提高(固溶态合金屈服强度先降低后升高),但是伸长率却是不断降低.时效峰值态GW94合金表现出优越的力学性能,室温时其抗拉强度和屈服强度分别为300、247 MPa,而伸长率仅为0.9%;200和250℃拉伸时,时效峰值态GW94合金抗拉强度、屈服强度和伸长率分别为329、234 MPa和2.6%以及312、233 MPa和2.7%.时效峰值态GW94、GW74合金出现抗拉强度随温度升高而升高的反常力学行为.
参考文献
[1] | E. Cerri;S. Barbagallo.The influence of high temperature exposure on aging kinetics of a die cast magnesium alloy[J].Materials Letters,20025(5):716-720. |
[2] | Yasumasa Chino;Yusuke Nakaura;Koichi Ohori.Mechanical properties at elevated temperature of a hot-deformed Mg-Al-Ca-Mn-Sr alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20070(0):31-36. |
[3] | X. F. Guo;D. Shechtman.Reciprocating extrusion of rapidly solidified Mg-6Zn-1Y-0.6Ce-0.6Zr alloy[J].Journal of Materials Processing Technology,20070(0):640-644. |
[4] | Jing B;Yangshan S;Feng X;Shan X;Jing Q;Tao WJ.Effect of extrusion on microstructures, and mechanical and creep properties of Mg-Al-Sr and Mg-Al-Sr-Ca alloys[J].Scripta materialia,200612(12):1163-1166. |
[5] | WANG Qudong;PENG Jianguo;Suéry Michel;Jean-Jacques Blandin.Effects of aging on the microstructures and mechanical properties of extruded AM50 + xCa magnesium alloys[J].稀有金属(英文版),2006(04):377-381. |
[6] | Hiroyuki Watanabe;Masahiro Yamaguchi;Yorinobu Takigawa.Mechanical properties of Mg-Al-Ca alloy processed by hot extrusion[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20070(0):384-388. |
[7] | Ya Zhang;Xiaoqin Zeng;Liufa Liu;Chen Lu;Hantao Zhou;Qiang Li;Yanping Zhu.Effects of yttrium on microstructure and mechanical properties of hot-extruded Mg-Zn-Y-Zr alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20041/2(1/2):320-327. |
[8] | L. Gao;R.S. Chen;E.H. Han.Effects of rare-earth elements Gd and Y on the solid solution strengthening of Mg alloys[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,20091/2(1/2):379-384. |
[9] | Nie JF;Gao X;Zhu SM.Enhanced age hardening response and creep resistance of Mg-Gd alloys containing Zn[J].Scripta materialia,20059(9):1049-1053. |
[10] | Q.M. Peng;Y.M. Wu;D.Q. Fang.Microstructures and properties of Mg-7Gd alloy containing Y[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,20071/2(1/2):252-256. |
[11] | Jun Wang;Jian Meng;Deping Zhang;Dingxiang Tang.Effect of Y for enhanced age hardening response and mechanical properties of Mg-Gd-Y-Zr alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20071/2(1/2):78-84. |
[12] | 曹樑;刘文才;李中权;吴国华;肖旅;王少华;丁文江.热处理对砂型铸造Mg-10Gd-3Y-0.5Zr镁合金微观组织和力学性能的影响[J].中国有色金属学报(英文版),2014(3):611-618. |
[13] | S.M. He;X.Q. Zeng;L.M. Peng.Precipitation in a Mg-10Gd-3Y-0.4Zr (wt. percent) alloy during isothermal ageing at 250 deg C[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,20061/2(1/2):309-313. |
[14] | S.M. He;X.Q. Zeng;L.M. Peng.Microstructure and strengthening mechanism of high strength Mg-10Gd-2Y-0.5Zr alloy[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,20071/2(1/2):316-323. |
[15] | 杨庆波;吴迪;陈荣石;牛建平.Gd元素含量对砂型铸造Mg-Gd-Y合金微观组织和力学性能的影响[J].铸造,2015(9):887-892. |
[16] | 彭卓凯;张新明;陈健美;蒋浩;肖阳.Zr在Mg-9Gd-4Y合金中的晶粒细化机制[J].北京科技大学学报,2006(2):148-152. |
[17] | 王其龙;吴国华;侯正全;陈斌;郑韫;丁文江.热处理对砂铸Mg-Gd-Y合金组织和力学性能的影响[J].铸造,2009(3):282-286,289. |
[18] | 高磊 .高强度铸造Mg-Dd-Y-Zr合金的成分设计、固溶强化及沉淀强化机理研究[D].中国科学院研究生院,2010. |
[19] | 何上明 .Mg-Gd-Y-Zr(-Ca)合金的微观组织演变、性能和断裂行为研究[D].上海交通大学,2007. |
[20] | Gao, L.;Chen, R. S.;Han, E. H..Microstructure and strengthening mechanisms of a cast Mg-1.48Gd-1.13Y-0.16Zr (at.%) alloy[J].Journal of Materials Science,200916(16):4443-4454. |
[21] | T. Honma;T. Ohkubo;K. Hono;S. Kamado.Chemistry of nanoscale precipitates in Mg-2.1Gd-0.6Y-0.2Zr (at.%) alloy investigated by the atom probe technique[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20051/2(1/2):301-306. |
[22] | 张新明;木宗云;邓运来;唐昌平;官立群.Mg-6Gd-Y-0.6Zr的析出行为和力学性能[J].中南大学学报(自然科学版),2013(6):2223-2229. |
[23] | L. L. Rokhlin;T. V. Dobatkina;I. E. Tarytina.Peculiarities of the phase relations in Mg-rich alloys of the Mg-Nd-Y system[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,20041/2(1/2):17-19. |
[24] | Liang, S.;Guan, D.;Tan, X.;Chen, L.;Tang, Y..Effect of isothermal aging on the microstructure and properties of as-cast Mg-Gd-Y-Zr alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20113(3):1589-1595. |
[25] | J.F. Nie.Effects of precipitate shape and orientation on dispersion strengthening in magnesium alloys[J].Scripta materialia,20038(8):1009-1015. |
[26] | 杨庆波;张丙岩;吴迪;陈荣石;牛建平.砂型铸造Mg-9Gd-4Y-0.5Zr合金的微观组织和力学性能[J].铸造,2016(2):124-131. |
[27] | Rokhlin LL.;Nikitina NI..Recovery after ageing of Mg-Y and Mg-Gd alloys[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,19982(2):166-170. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%