引入单色OLED显示模块作为交通信号机的人机界面显示器,模块分辨率为128×64,具有16级灰度的文字和图片显示.所设计的显示控制方案采用ARM9作为处理芯片,可以嵌入科学的算法对交通流进行有效控制.该智能交通信号系统不但能够提供良好的人机界面,而且适应室外的恶劣环境,同时可以对交通流进行多相位、多时段控制.
OLED display module was used as a man-machine interface in the traffic signal system. In this design, the OLED display realizes the 128×64 pixels of picture and character monochrome display with 16 gray-scales. The intelligent traffic signal system with OLED display not only can provide good man-machine interface, and adapt to the harsh outdoor environment, but also can achieve multi-phase and multi-time control of traffic flow. The intelligent traffic signal system with OLED display uses the ARM9 as processor, so a scientific algorithm can be embedded in it to carry out effective control of traffic flow.
参考文献
[1] | 杨佩昆,张树升.交通管理与控制[M].北京:人民交通出版社1995. |
[2] | 郑喜凤,侯世敏.基于C8051F的OLED控制电路的设计[J].微计算机信息,2008,(7):283-284. |
[3] | 金钰,郑喜凤,丁铁夫.基于DSP的OLED显示器软硬件设计及实现[J].液晶与显示,2008,23(2):210-211. |
[4] | 金伟,凌永顺,路远,等.基于LPC2210和SSD1339的PM-OLED驱动控制电路[J].发光学报,2007,28(5):792-797. |
[5] | 侯冬晴.基于ARM9交通灯控制系统的设计[J].测试与控制,2007,(3):145-147 |
[6] | 孙天泽,袁文菊.嵌入式设计及Linux驱动开发指南[M].北京:电子工业出版社,2007. |
- 下载量()
- 访问量()
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%