对OLED显示模块和高性能的32位ARM920T系列微处理器进行了介绍,并使其有机结合构成本控制系统的显示终端,根据ARM$3C2410与OLED模块硬件接口电路的设计,对在嵌入式Linux 2.4.18下编写、编译和加载其接口驱动程序进行了详细阐述.实践表明,系统参数可以在OLED屏上完整显示,效果良好.
OLED module and high performance 32 bit ARM920T series microprocessors was introduced,and applied to the display terminal of this control system. Meanwhile, according to the design of hardware interface circuit of ARM $3C2410 and OLED module, writing,compiling and loading the interface driver program in embedded Linux 2.4. 18 were also ex-plained in detail. The result shows that system parameters can be integrally displayed on OLED screen and the good effect has been achieved.
参考文献
| [1] | 毛兴武,张艳雯,周建军,等编著.新一代绿色光源LED及其应用技术[M].北京:人民邮电出版社,2008. |
| [2] | 金钰,郑喜凤,丁铁夫.基于DSP的OLED显示器软硬件设计及实现[J].液晶与显示,2008,4(2):209-212. |
| [3] | 深圳市金泽迪液晶科技有限公司.JDZl2864Z.128x64 graphics OLED display module technology spec.fication[R].深圳,2007. |
| [4] | Rubini A,Corbet J.LINUX设备驱动程序(第二版)[M].魏永明,骆刚,姜君,译.北京:中国电力出版社,2002. |
| [5] | 蒋三新,黄晓革.OLED显示模块与AT91RM9200的接口设计[J].单片机与嵌入式系统应用,2007,1(1).38-40. |
| [6] | 刘淼,编著.嵌入式系统接口设计与Linux驱动程序开发[M].北京:北京航空航天大学出版社,2006. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%