为在Pyrex玻璃基片上湿法腐蚀出易于金属化(如电镀等)的深凹坑(或凹槽),选用HF:HNO3:H3O为腐蚀液,分别以Cr/Au(30nm/300nm,溅射)加光刻胶(15μm)和Cr/Pt(30nm/300nm,溅射)加光刻胶(15μm)作为掩膜进行腐蚀实验.实验发现在Cr/Pt/光刻胶掩膜下,Pyrex玻璃的腐蚀凹坑横向钻蚀小(钻深比1.34:1),侧壁倾斜光滑,并在凹坑(深约28μm)内成功地电镀了焊盘.该实验结果对要求高深宽比沟槽的微流体器件的制造也有一定参考意义.
参考文献
| [1] | Lin C H;Lee G B;Lin Y H et al.A fast prototyping process for fabrication of microfluidic systems on soda-lime glass[J].Journal of Micromechanics and Microengineering,2001,11:726-732. |
| [2] | Grosse A.;Fouckhardt H.;Grewe M. .Deep wet etching of fused silica glass for hollow capillary optical leaky waveguides in microfluidic devices[J].Journal of Micromechanics and Microengineering,2001(3):257-262. |
| [3] | Cormany T;Enoksson P;Stemme Deep G .Wet etching of borosilicate glass using an anodically bonded silicon substrate as mask[J].J Mieromeeh Microeng,1998,8:84-87. |
| [4] | MourzinaY;Steffen A;Offenhausser A .The evaporated metal masks for chemical glass etching for BioMEMS[J].Mierosystem technologies,2005,11:135-140. |
| [5] | Bu MQ;Melvin T;Ensell GJ;Wilkinson JS;Evans AGR .A new masking technology for deep glass etching and its microfluidic application[J].Sensors and Actuators, A. Physical,2004(2/3):476-482. |
| [6] | Iliescu C;Jing J;Tay FEH;Miao JM;Sun TT .Characterization of masking layers for deep wet etching of glass in an improved HF/HCl solution[J].Surface & Coatings Technology,2005(1/3):314-318. |
| [7] | Iliescu C;Miao JM;Tay FEH .Stress control in masking layers for deep wet micromachining of Pyrex glass[J].Sensors and Actuators, A. Physical,2005(2):286-292. |
| [8] | Cui Feng;Chen Wenyuan;Su Yufeng.Design of electrostatically levitated micromachined rotational gyroscope based on UV-LIGA technology[A].北京,2004:264-275. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%