研究了在透光性基底上直接光刻SU8光刻胶制作可实现光集成微流控芯片的工艺,讨论了基底厚度、透光性和样品承载台表面反射性等因素对透光性基底上SU8光刻图形质量的影响.研究结果表明,通过减少样品承载台表面对紫外光的反射,可有效的解决光刻胶内非定义曝光区域出现感光交联的问题.
参考文献
| [1] | Maluf,Nadim.An introduction to microelectromechanical systems engineering[M].Norwood,MA:Arttech House Inc,2004:4-6. |
| [2] | Carsten Haber .Microfluidics in commercial applications;an industry perspective[J].Lab on a chip,2006(9):1118-1121. |
| [3] | Manz A;Harrison D J;Elisabeth M J et al.Planar Chips Technology for Miniaturization and Integration of Separation Techniques Into Monitoring systems[J].Journal of Chromatography,1992,593:253-258. |
| [4] | Harrison D J;Flari K;seiler K et al.Micromaching a miniaturized capillary electrophoresis based chemical analy-sis system on a chip[J].Science,1993,261:895-897. |
| [5] | 杨承,黄成军,刘锋,于军.毛细管电泳芯片制备工艺研究[J].华中科技大学学报(自然科学版),2004(07):92-94. |
| [6] | Zhifeng Chen;Yunhua Gao;Jinming Lin et al.Vacuum-assisted thermal bonding of plastic capillary electrophoresis microchip imprinted with stainless steeel template[J].Journal of Chromatography A,2004,1038:239-245. |
| [7] | 李建华,陈迪,刘景全,朱军.微流控芯片金属模具制备工艺研究[J].微细加工技术,2005(04):56-58,75. |
| [8] | 周小棉,戴忠鹏,罗勇,刘大渔,王辉,毛秀丽,林炳承.注塑型聚甲基丙烯酸甲酯多通道微流控芯片的研制及其性能考察[J].高等学校化学学报,2005(01):52-54. |
| [9] | Bilenberg B;Nielsen T;Clausen B;Kristensen A .PMMA to SU-8 bonding for polymer based lab-on-a-chip systems with integrated optics[J].Journal of Micromechanics and Microengineering,2004(6):814-818. |
| [10] | SU8 2000 series manual[OL].http://www.microchem.com,2005-5-20. |
| [11] | 李雄,徐智谋,易新建,何少伟,刘胜,连昆.不同波段近紫外光在SU-8胶中穿透深度的研究[J].微细加工技术,2004(01):38-40,46. |
| [12] | 代彩红;于家琳.光谱辐射度测量中杂散辐射屏蔽材料的选择[J].现代计量测试,2000(06):50-53. |
| [13] | Y.-G. Zhao;W.-K. Lu;Y. Ma .Polymer waveguides useful over a very wide wavelength range from the ultraviolet to infrared[J].Applied physics letters,2000(19):2961-2963. |
| [14] | 舒尔兹 H.玻璃的本质结构和性质[M].北京:中国建筑工业出版社,1984 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%