欢迎登录材料期刊网

材料期刊网

高级检索

利用全息曝光方法制备了分布反馈量子级联激光器的光栅掩模,选择和发展了恰当的用于InGaAs/InP材料的光栅腐蚀优化工艺,得到腐蚀规律,讨论了腐蚀机制.在量子级联激光器的In-GaAs/InP层上制备光栅得到分布反馈量子级联激光器,其单模特性较好,信噪比大于30dB.

In this paper, first order gratings for InP based distributed feedback quantum cascade lasers ( DFB - QCL) were fabricated by holographic lithography and wet chemical etching. The etching process was optimized for small patterns and good grating profiles. DFB QCL operating at room temperature in pulsed mode was demonstrated with a high side mode suppression ratio of about 30dB. The device results indicate the high quality of gratings.

参考文献

[1] Faist J;Capasso F;Sivco D et al.Hutchinoson.and A.Y.Cho,Quantum cascade laser[J].Science,1994,264:553-557.
[2] Faist J;Gmachl C;Capasso F;Sirtori C;Sivco DL;Baillargeon JN;Cho AY .Distributed feedback quantum cascade lasers[J].Applied physics letters,1997(20):2670-2672.
[3] Li A-Z;Cheng H;Milnes A G .Aspects ofGaAs selective area growth by molecular beam epitaxy with patterning by Sio2 masking[J].JECS,1983,130(10):2072.
[4] Gollub D.;Fischer M.;Kamp M.;Forchel A. .1.3 mu m continuous-wave GaInNAs/GaAs distributed feedback laser diodes[J].Applied physics letters,2002(23):4330-4331.
[5] Desalvo G C;Tseng W F;Comas J .Etch rates and selec-tivities of Citric Acid/Hydrogen Peroxide Oil GaAs,A1_(0.3) Ga_(0.7)As,In_(0.2)Ga_(0.8)As,In_(0.53)Ga_(0.47)As,In_(0.52)Al_(0.48)As,and InP[J].J Elee Soc,1992,139(03):831-835.
[6] Li AZ;Xu GY;Zhang YG;Li H;Zhang X .Low threshold distribution feedback quantum cascade lasers at 7.6 mu m grown by gas source molecular beam epitaxy[J].Journal of Crystal Growth,2005(1/4):770-774.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%