系统研究了抛光液的pH值、抛光压力和相对转速等因素对蓝宝石抛光速率和表面粗糙度的影响,研究结果表明:随pH值(9-12)的升高,抛光速率增加,表面粗糙度先降低后升高;随抛光压力和相对转速的增加,抛光速率先增加后降低,表面粗糙度先降低后升高.研究分析认为:pH值因影响在蓝宝石表面形成的水化层从而影响抛光速率和粗糙度;与抛光压力和相对转速相关的Hersey系数对抛光效果影响很大,当Hersey系数为24时,蓝宝石的抛光速率和表面平整度均达到最佳.
参考文献
| [1] | Hansen M.;Fini P.;Craven M.;Heying B.;Speck JS.;DenBaars SP. .Morphological and optical properties of InGaN laser diodes on laterally overgrown GaN[J].Journal of Crystal Growth,2002(4):623-630. |
| [2] | 马振国,刘玉岭,武亚红,王立发,陈景.蓝宝石衬底nm级CMP技术研究[J].微纳电子技术,2008(01):51-54. |
| [3] | 赵之雯,牛新环,檀柏梅,袁育杰,刘玉岭.蓝宝石衬底材料CMP抛光工艺研究[J].微纳电子技术,2006(01):16-19,46. |
| [4] | 王银珍,周圣明,徐军.蓝宝石衬底的化学机械抛光技术的研究[J].人工晶体学报,2004(03):441-447. |
| [5] | Zhu HL;Tessaroto LA;Sabia R;Greenhut VA;Smith M;Niesz DE .Chemical mechanical polishing (CMP) anisotropy in sapphire[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2004(1/4):120-130. |
| [6] | Honglin Zhu;Dale E.Niesz;Victor A Greenhut .The effect of abrasive hardness on the chemical-assisted polishing of (0001) plane sapphire[J].Journal of Materials Research,2005,20(02):504-520. |
| [7] | PRESTON FW .The Theory and Design of Plate Glass Polishing Machine[J].Journal of the Society of Glass Technology,1927,11(44):214. |
| [8] | 谭训彦,王昕,尹衍升,刘英才,张金升,孟繁琴.α-Al2O3的晶体结构与价电子结构[J].中国有色金属学报,2002(z1):18-23. |
| [9] | B. Mullany;G. Byrne .The effect of slurry viscosity on chemical-mechanical polishing of silicon wafers[J].Journal of Materials Processing Technology,2003(1/3):28-34. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%