本文研究了一种基于低阻硅埋置腔体和BCB/Au金属布线的系统级封装技术,改进了介质层BCB在有腔体硅衬底上的第一次旋涂工艺.利用25um厚的BCB介质层,在低阻硅衬底上设计、制作了微带传输线(MSL)、接地共面波导线(CPWG),测试发现具有理想的传输性能:标准50欧姆微带传输线,在20-30GHz频带内插入损耗小于0.08dB/mm,回波损耗大于32dB/mm.在此基础上基于薄膜微带线结构设计、制作了一种应用于K波段雷达前端系统集成功分器,面积约为1.6×0.84mm2,插入损耗小于0.45dB,端口回波损耗大于25dB.
参考文献
| [1] | The International Technology Roadmap for Semiconductors:2005 Edition[M]. |
| [2] | Chanchani.R;BethkeD.T;Webb,D.B.Intergrated Substrate Technology[A].,2004:1232-1236. |
| [3] | Fuhan Liu;Tummala,R.R;Sundaram.V.Multifunctional integrated substrate technology for high density SOP packaging[A].,2004:83-90. |
| [4] | T.Mangold;P.Gulde;G.Neumann;P.Russer.A Multichip Module Integration Technology on Silicon Substrate for High Frequency Applications[A].,1998:181-184. |
| [5] | Woo-Suk Sul;Tea-Sin Kang;An Dan.Low-character-istic impedance transmission line fabricated using benzacyclobutene thin film[M].Optoelectronic and Microelectronic Materials and a Devices,2002:353-356. |
| [6] | Chinoy P.B.;Tajadod J. .Processing and microwave characterization of multilevel interconnects using benzocyclobutene dielectric[J].IEEE transactions on components, hybrids, and manufacturing technology,1993(7):714-719. |
| [7] | Seonho Seok;Nathalie Rolland;Paul-Alain Rolland .Design, Fabrication, and Measurement of Benzocyclobutene Polymer Zero-Level Packaging for Millimeter-Wave Applications[J].IEEE Transactions on Microwave Theory and Techniques,2007(5):1040-1045. |
| [8] | Xiaoyun Ding;Fei Geng;Le Luo .Process Development In Metal/bcb Multilayer Interconnections Of Mmcm With Embedded Chip In Si Substrate[J].Microelectronic engineering,2009(3):335-339. |
| [9] | E.J.Denlinger.Losses of microstrip lines[J].IEEE Transaction Microwave theory Tech,1980:513-522. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%