本文分析了白光干涉仪中多波长值的选择对条纹可见度尤其是对零级条纹附近可见度的影响,给出了使用相干长度都较短的两个和三个波长组成的光源情况下波长值优化选择的原则及其数值模拟的例子.本文的结果可用于白光干涉仪的优化设计.
参考文献
[1] | Belleville C, Duplain G. White-light interferometric multimode fiber-optic strain sensors [J]. Opt. Lett., 1993, 18:78 |
[2] | Deck L, Groot P D. High-speed noncontact profiler based on scanning white-light interferometry [J]. Appl. Opt.,1994, 33(31): 7334 |
[3] | Gergess A S, Newson T P, Jackson D A. Coherence tuned fiber optic sensing system, with self-initialization, based on a multi-mode laser diode [J]. Appl. Opt., 1990, 29:4473 |
[4] | Rao Y J, Ning Y N, Jackson D A. Synthesized source for white-light sensing system [J]. Opt. Lett., 1993, 18:462 |
[5] | Wang D N, Ning Y N, Grattan K Y V. Optimized multi-wavelength combination sources for interferometric use [J]. Appl. Opt., 1994, 33:7326 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%