欢迎登录材料期刊网

材料期刊网

高级检索

以NH4HCO3为电解质对PAN基炭纤维进行了连续表面处理,并利用X射线光电子能谱(XPS)、X射线衍射(XRD)、拉曼光谱、扫描电子显微镜(SEM)和自动电位滴定等方法,系统研究了电化学氧化反应后炭纤维表面石墨微晶尺寸的变化规律,推导出微晶宽度(La)、微晶厚度(Lc)与电流密度(J)之间存在线性关系式;同时,经电化学氧化处理后,炭纤维表面含氧官能团的摩尔分数增加8.54%,表面吸附水的摩尔分数增加5.34%,使其表面由憎液性变为亲液性,这有利于提高炭纤维增强树脂基复合材料(CFRP)的层间剪切强度(ILSS).

参考文献

[1] 贺福;王茂章.炭纤维及其复合材料[M].北京:科学出版社,1995
[2] 王茂章.聚丙烯腈基炭纤维[J].新型炭材料,1998(04):79.
[3] 立早.炭纤维增强复合材料[J].新型炭材料,1999(04):79.
[4] Butyrin G M,Demin A V,Kazakov M E.处理对粘胶基炭纤维材料及其炭/树脂和炭/炭复合材料性能的影响[J].新型炭材料,2001(03):17-23.
[5] 杨永岗;李润民;贺福.用Weibull模数表征炭纤维增强树脂复合材料的力学性能[J].炭素技术,1996(05):1-4.
[6] 郭领军,李贺军,薛晖,石振海,李克智.短切炭纤维增强沥青基C/C复合材料的组织特征[J].新型炭材料,2004(02):119-123.
[7] 李晔,黄启忠,王林山.树脂浸渍法对炭/炭复合材料力学性能的影响[J].新型炭材料,2003(02):117-122.
[8] 李向山;张萍;周斌.实验室用光氧化法炭纤维表面处理装置[J].炭素技术,1994(06):20-23.
[9] Wu ZH.;Gardner SD.;Pittman CU. .NITRIC ACID OXIDATION OF CARBON FIBERS AND THE EFFECTS OF SUBSEQUENT TREATMENT IN REFLUXING AQUEOUS NAOH[J].Carbon: An International Journal Sponsored by the American Carbon Society,1995(5):597-605.
[10] Bismarck A.;Kumru M.E. .Study on surface and mechanical fiber characteristics and their effect on the adhesion properties to a polycarbonate matrix tuned by anodic carbon fiber oxidation[J].Composites, Part A. Applied science and manufacturing,1999(11):1351-1366.
[11] Fukunaga A;Ueda S .Anodic surface oxidation for pitch-based carbon fiber and the interfacial bond strengths in epoxy matrices[J].Composites Science and Technology,2000,60:249-254.
[12] Yue ZR;Wang L;Gardner SD;Pittman CU;Jiang W .Surface characterization of electrochemically oxidized carbon fibers[J].Carbon: An International Journal Sponsored by the American Carbon Society,1999(11):1785-1796.
[13] 杨永岗,赵建国,贺福.气液双效表面处理方法的应用[J].新型炭材料,1999(04):49-52.
[14] C. U. Pittman;W. Jiang;Z. R. Yue .Surface area and pore size distribution of microporous carbon fibers prepared by electrochemical oxidation[J].Carbon: An International Journal Sponsored by the American Carbon Society,1999(1):85-96.
[15] Alexande M R;Jones F R .Effect of electrolytic oxidation upon the surface chemistry of type a carbon fibers:Ⅲ. Chemical state, source and location of surface nitrogen[J].CARBON,34(09):1093-1102.
[16] 杨永岗 .一种炭纤维表面处理新方法——气液双效法[D].中国科学院山西煤炭化学研究所,1996.
[17] 杨永岗,贺福,王茂章,张碧江.用SEM研究表面处理对炭纤维增强复合材料剪切断裂的影响[J].新型炭材料,1999(01):32-36.
[18] Papirer E;Guyon E .Contribution to the study of the surface groups on carbons-I[J].Carbon,1978,16(04):127-133.
[19] BISMARCK A;Richter D;Wuertz C et al.Basic acidic surface oxides on carbon fiber and their influence on the expected adhesion to polyamide[J].Colloids and Surfaces A:Physicochemical and Engineering Aspects,1999,159:341-350.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%