针对传统方法通过调整制膜参数控制PTFE微孔薄膜孔径的局限性,采用双层PTFE基带共拉伸的方法制备薄膜.在一定温度和拉力下,通过双层未脱脂基带同时脱脂、横向扩幅和固化的方法,研制出小孔径PTFE薄膜.系统研究了脱脂拉力和温度对基带和薄膜焊接牢度的影响,并从材料结晶结构和机械嵌合的角度揭示焊接机理.结果表明,PTFE晶粒的部分熔融和机械嵌合导致原纤纠缠和结点融合是形成薄膜焊接的原因.
参考文献
[1] | 肖容绪.袋式除尘器与环境保护[J].过滤与分离,2000(03):32. |
[2] | Harley Jar Daniel J .Waterproof,breathable fabric for outdoor athletic apparel[P].US 5415924,1995-05-16. |
[3] | Von Bluecher Hubert;De Ruiter .Waterproof and moisture-conducting fabric coated with hydrophilic polymer[P].US 4454191,1984-06-12. |
[4] | 郝新敏,张建春,周国泰,郭玉海.可重复使用透湿型SARS防护服材料的研究[J].西安工程科技学院学报,2003(03):206-211. |
[5] | Huang HZ.;Zhang HC.;Hao XM.;Guo YH. .Study of a new novel process for preparing and co-stretching PTFE membrane and its properties[J].European Polymer Journal,2004(4):667-671. |
[6] | 郝新敏,张建春,郭玉海,张卫东.拉伸工艺对膨体PTFE薄膜微孔结构的影响[J].膜科学与技术,2005(04):26-29. |
[7] | 郭玉海;张华鹏;张建春 等.一种空气除菌用聚四氟乙烯薄膜材料的制备方法[P].CN 200510061828.9,2005-10-06. |
[8] | Guo YH;Chen JY;Hao XM;Zhang JC;Feng XX;Zhang HP .A novel process for preparing expanded Polytetrafluoroethylene(ePTFE) micro-porous membrane through ePTFE/ePTFE co-stretching technique[J].Journal of Materials Science,2007(6):2081-2085. |
[9] | 王小群 .纤维增强聚四氟乙烯复合材料研制和基体结晶动力学研究[D].哈尔滨工业大学,1998. |
[10] | 缪京媛;叶牧.氟塑料加工与应用[M].北京:化学工业出版社,1987:104;18. |
[11] | Kirtamura T;Kurumda K;Masataka T et al.Formation mechanism of porous structure in polytetrafluoroethylene (PTFE)porous memblrane through mechanical operations[J].Polymer Engineering and Science,1999,39(11):2256-2263. |
[12] | Kitamura T.;Tanigaki M.;Kurumada K.;Ohshima M.;Kanazawa S.;Okabe S. .Morphology change in polytetrafluoroethylene (PTFE) porous membrane caused by heat treatment[J].Polymer engineering and science,2000(3):809-817. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%