以低碳MoNbV奥氏体钢为研究对象,在Formaster-D全自动化仪上测量了过冷奥氏体CCT曲线;在Gleeble1500热模拟机上,利用热膨胀法制定了800℃形变奥氏体的CCT曲线.采用光学显微镜、金属薄膜电子显微分析发现,添加合金元素、形变和冷却速度对低碳贝氏体钢显微组织均有很大的影响.
参考文献
[1] | Yang J R;Huang C Y;Chiou C S .The influence of plastic deformation and cooling rates on the microstructural constituents of an ultra- low carbon bainite steel[J].ISIJ International,1995,35(08):1013-1016. |
[2] | S. YAMAMOTO;H. YOKOYAMA;K. YAMADA .Effects of the austenite grain size and deformation in the unrecrystallized austenite region on bainite transformation behavior and microstructure[J].ISIJ International,1995(8):1020-1026. |
[3] | Fujiwara K;Okaguchi S;Ohtani H .Effect of hot deformation on bainite structure in low carbon steel[J].ISIJ International,1995,35(08):1006-1012. |
[4] | D.Q.Bai S.Yue .Effect of Deformation and Cooling Rate on the Microstructures of Low Carbon Nb-B Steels[J].ISIJ International,1998(4):371-379. |
[5] | Manohar P A;Chandra T .Continuous cooling transformation behavior of high strength microalloyed steels for linepipe applications[J].ISIJ International,1998,38(04):766-772. |
[6] | Bai D Q;Yue S;Maccagno T M;Jonas J J .Static recrystalliastion of Nb and Nb-B steels under continuous cooling conditions[J].ISIJ International,1996,36:1084-1088. |
[7] | Bai D Q;Yue S;Maccagno T M;Jonas J J .Continuous cooling transformation temperature determined by compression tests in low carbon bainite grades[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1998,29A:989-992. |
[8] | Smith Y E;Sandberg A .Continuous cooling transformation kinetics of thermomechanically worked low-carbon austenite[J].Metallurgical and Materials Transactions,1971,2:1711-1716. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%