利用直流脉冲等离子电源装置对Ti6A14V钛合金表面渗氮处理,研究了渗氮层的相组成、硬度分布、韧度及摩擦学性能,采用喷丸形变强化(SP)对渗氮层进行后处理,以达到联合提高钛合金微动疲劳(FF)抗力的目的.研究结果表明:脉冲电源等离子技术可在钛合金表面获得由TiN、Ti2N、Ti2A1N等相组成的渗氮层,该改性层能够显著地提高钛合金常规磨损和微动磨损(FW)抗力,但降低了基材的FF抗力.渗氮层的减摩和抗磨性能与SP引入的表面残余压应力协同作用,使钛合金FF抗力超过了SP单独作用.提高渗氮层韧度对改善钛合金FF和FW性能均十分重要.
参考文献
| [1] | S. Chakravarty;R.G. Andrews;P.C. Patnaik .The Effect of Surface Modification on Fretting Fatigue in Ti Alloy Turbine Components[J].JOM,1995(4):31-35. |
| [2] | Koul A K;Wakkace W;Bibby M.An investigation on surface treatments for improving the fretting fatigue resistance of titanium alloys[M].Swsimbra, Portugal,1996 |
| [3] | 梁佑明.Ti-1023合金的微动疲劳及防护[J].材料工程,1995(01):15. |
| [4] | Vincent L.Materials and fretting, Fretting fatigue, ESIS, 18[M].Mechanical Engineering Publication, London,1994:323-338. |
| [5] | Nishida S I;Hattori N;Watanabe K.Fatigue properties of ion-nitrided Ti6A 14V alloy[M].,1996:447-452. |
| [6] | Zdunek K .Formation of metallic coatings on non-heated substrates by the impulse plasma method[J].Materials Science and Engineering,1991,A140:709-714. |
| [7] | Daoxin Liu;Bin Tang;Xiaodong Zhu;Hua Chen;Jiawen He;Jean-Pierre Celis .Improvement of the fretting fatigue and fretting wear of Ti6A14V by duplex surface modification[J].Surface & Coatings Technology,1999(0):234-238. |
| [8] | 刘道新,何家文.喷丸强化因素对Ti合金微动疲劳抗力的作用[J].金属学报,2001(02):156-160. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%