综述了等离子体基高温离子注入的发展及应用情况,介绍了由于高温注入中辐照增强扩散和热扩散的共同作用,注入层成分、组织结构、力学性能和抗腐蚀性能随温度提高发生的变化.并对今后的发展趋势作了预测.
参考文献
[1] | Conrad J R et al.Plasma source ion-implantation technique for surface modification of materials[J].Journal of Applied Physics,1987,62(11):4591-4596. |
[2] | 王钧石,陈元儒,白彬.等离子浸没式注入表面改性[J].金属热处理,1999(11):19-21. |
[3] | A A巴巴特-札赫里亚宾;何大智;王雪芬校.Γд库兹涅佐夫著书名[M].北京:国防工业出版社,1988:56-58. |
[4] | Ensinger W. .Modification of mechanical and chemical surface properties of metals by plasma immersion ion implantation[J].Surface & Coatings Technology,1998(1/3):341-352. |
[5] | Gunzel R;Brutscher J .Sheath dynamics in plasma immersion ion implantation[J].Surface and Coatings Technology,1996,85:98-104. |
[6] | Mandl S et al.Measured and calculated dose distribution for 2D plasma immersion ion implantation[J].Surface and Coatings Technology,1997,93:229-233. |
[7] | Qin Shu;Chan Chung;Zhou Yuanzhong .Two-dimensional modeling and simulation for dynamic sheath expansion during plasma immersion ion implantation[J].IEEE Transactions on Plasma Science,1999(3):766-771. |
[8] | Ensinger W.;Volz K. .Thin film oxides as probe for homogeneity measurements of 3-dimensional objects treated by plasma immersion ion implantation[J].Nuclear Instruments and Methods in Physics Research, Section B. Beam Interactions with Materials and Atoms,2000(0):154-158. |
[9] | Wolfhard Moller;Stefano Parascandola;Olaf Kruse;Reinhard Gunzel;Edgar Richter .Plasma-immersion ion implantation for diffusive treatment[J].Surface & Coatings Technology,1999(0):1-10. |
[10] | Xie L.Influence of temperature on nitrogen ion implantation of incoloy alloys 908 and 909[J].Materials Science and Engineering,1991(A139):179-184. |
[11] | Collins G A;Hutchings R;Tendys J.Plasma immersion ion implantation of steels[J].Materials Science and Engineering,1991(A139):171-178. |
[12] | G. Thorwarth;S. Mandl;B. Rauschenbach .Plasma immersion ion implantation of cold-work steel[J].Surface & Coatings Technology,2000(1/3):94-99. |
[13] | Malaczyski Gerard W;Chi Leung H;Elmoursi Alaa A.Characterization of surface modified α-iron by nitrogen plasma immersion ion implantation:a microstructural study[J].Materials Science and Engineering,1999(A262):289-299. |
[14] | Samandi M;Shedden B A;Smith D I.Microstructure,corrosion and tribological behavior of plasma immersion ion-implanted austenitic stainless steel[J].Surface and Coatings Technology,1993(59):261-266. |
[15] | Li X;Samandi M;Dunne D.Cross-sectional transmission electron microscopy characteriza-tion of plasma immersion ion implanted austenitic stainless steel[J].Surface and Coatings Technology,1996(85):28-36. |
[16] | C. Blawert;B. L. Mordike;Y. Jiraskova;O. Schneeweiss .Structure and composition of expanded austenite produced by nitrogen plasma immersion ion implantation of stainless steels X6CrNiTi1810 and X2CrNiMoN2253[J].Surface & Coatings Technology,1999(0):189-198. |
[17] | Blawert C;Mordike B L.Nitrogen plasma source ion implantation for surface treatment and wear protection of austenitic stainless steel X6CrNiTi1810[J].Surface and Coatings Technology,1999(116-119):352-360. |
[18] | Blawert C;Mordike B L;Jirfskkova Y.Phase and microstructural study of surface layers produced by plasma immersion ion implantation of stainless steels X6CrNiTi1810[J].Surface Engineering,1999(156):469-475. |
[19] | Li X;Wexler D;Calka A.Microstructural precursors for decomposition of nitrided stainless steel:A comparison of plasma immersion ion implantation (PI3) and reactive ball milling[J].Materials Science Forum,1999(312):339-344. |
[20] | 战再吉 .铝合金等离子体基离子注入氮层的组织结构及摩擦学特性[D].哈尔滨工业大学,1999. |
[21] | 战再吉;马欣新;夏立芳 .铝合金等离子体淹没离子注入氮层组织及其耐磨性[J].材料研究学报,1998,12(05):546-549. |
[22] | 战再吉;马欣新;冯莉丽 等.铝合金等离子体淹没氮离子注入层的摩擦学性能研究[J].摩擦学学报,1998,18(04):300-304. |
[23] | 战再吉;马欣新;冯莉丽 等.等离子体基离子注入氮对铝合金耐磨性的影响[J].金属热处理学报,1998,19(03):7-10. |
[24] | Johns S M;Bell T;Samandi M.Wear resistance of plasma immersion ion implanted Ti6A14V[J].Surface and Coatings Technology,1996(85):7-14. |
[25] | Shang Z K et al.Plasma source ion implantation project at southwestern institute of Physics[J].Surface and Coatings Technology,1996,85:105-111. |
[26] | 季红兵,夏立芳,马欣新,孙跃.Ti6Al4V合金氮离子注入层的成分、组织结构及摩擦学性能[J].金属热处理,2000(02):7-10,22. |
[27] | Chen A et al.Surface modification of Ti-6A1-4V surgical alloy by plasma source ion implantation[J].Surface and Coatings Technology,1991,50:1-8. |
[28] | Wei R.Low energy,high current density ion implantation of materials at elevated temperatures for tribological applications[J].Surface and Coatings Technology,1996(83):218-227. |
[29] | Jones A M;Bull S J.Changing the trihological performance of steels using low energy. high temperature nitrogen ion implantation[J].Surface and Coatings Technology,1996(83):269-274. |
[30] | Lei MK.;Zhang ZL. .PLASMA SOURCE ION NITRIDING - A NEW LOW TEMPERATURE, LOW-PRESSURE NITRIDING APPROACH[J].Journal of Vacuum Science & Technology, A. Vacuum, Surfaces, and Films,1995(6):2986-2990. |
[31] | Lei M K;Zhang Z L.Plasma source ion nitriding of pure iron: formation of an iron nitride layer and hardened diffusion layer at low temperature[J].Surface and Coatings Technology,1997(91):25-31. |
[32] | Blawert C;Mordike B L .Industrial applications of plasma immersion ion implantation[J].Surface and Coatings Technology,1997,93:274-279. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%