研究Zn-Al-Cu伪合金涂层的制备与性能,分析涂层组织成分、硬度以及光固化基体材料对涂层硬度的影响.研究发现,涂层中Al-Cu-Mg合金的原始成分越高,涂层硬度提高越明显;涂层硬度决定于涂层的组织和应力状态,其中应力状态又是决定涂层硬度非常显著的因素;间歇喷涂层的残余应力的绝对值最小,加工硬化效应最小,硬度较低.
参考文献
| [1] | Paul F Jacobs.Stereolihography and other RP·M Technologies:From Rapid Prototyping to Rapid Tooling[M].Society of Manufacturing Engineers SMECASA Dearborn Mich,1996:119-148. |
| [2] | Manol Gupta;Farghalli Mohamed;Enrique Lavernia .The effect of ceramic reinforcements during spray atomization and codeposition of metal matrix composites[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1992,23(03):831-835. |
| [3] | Zanchuk Walter A;Grant Leon J.Use of spray metal tooling for metal injection molding[A].San Diego, NJ, USA,1989:25-34. |
| [4] | Cheng H .The application of arc spray process in rapid molding[J].Met Ind(China),1996,30(03):84-88. |
| [5] | Dong ZN .Rapid molding technique by arc spraying[J].Met Ind(China),1996,30(01):26-30. |
| [6] | Coddet C;Montavon G;Verdy C.The plasma spray forming of high duty functional prototypes[A].Xi'an ShaanxiChina,1999:132-136. |
| [7] | 胡特生.电弧焊[M].北京:机械工业出版社,1994:16,21,47. |
| [8] | 王伊卿,赵文轸,唐一平,卢秉恒.电弧喷涂模具材料性能研究[J].中国机械工程,2000(10):1112-1115. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%