采用2kW Nd:YAG激光器对NiTi合金进行表面重熔处理,利用扫描电镜、X射线衍射、X光电子能谱分析重熔层成分和组织结构,利用电化学测试研究重熔层耐腐蚀性能.结果表明:NiTi合金经过激光重熔处理后,可得到致密的重熔层;根据激光处理参数的不同,在重熔层中会出现Ti2Ni、TiNi3等新相,重熔层表面Ti/Ni及Ti4+/Ti比显著提高;电化学极化曲线表明激光重熔后NiTi合金的耐蚀性得到了显著改善.
参考文献
[1] | 褚幼义形状记忆合金在医学上应用研究的新动向[J].医用生物力学,1995,10(02):1-3. |
[2] | Trepanier C;Ztabrizian M;Yahia L H.Improvement of the corrosion resistance of NiTi stents by surface treatments[A].,1997:363-368. |
[3] | Wever DJ;Veldhuizen AG;de-Vries J;Busscher HJ;Uges DR;van-Horn JR .Electrochemical and surface characterization of a nickel-titanium alloy.[J].Biomaterials,1998(7/9):761-769. |
[4] | Filip P;Musialek J;Michalek K.TiAlV/Al2 O3/NiTi shape memory alloy smart composite biomaterials for orthopedic surgery[J].Materials Science and Engineering,1999:769-774. |
[5] | Villermaux F;Tabrizian M;Yahia L H et al.Excimer laser treatment of NiTi shape memory alloy biomaterials[J].Applied Surface Science,1997,109 - 110:62-66. |
[6] | Rondelli G;Vicentini B .Evaluation by electrochemical test of the passive film of equiatomic Ni-Ti alloy also in presence of stress-induced martensite[J].Journal of Biomedical Materials Research,2000,51(01):47-54. |
[7] | Shih C C;Lirm S J;Chung K H et al.Increased corrosion resistance of stent materials by converting current surface film of polycrastalline oxide into amorphous oxide[J].Journal of Biomedical Materials Research,2000,52(02):323-332. |
[8] | Pelletier H;Muller D;Mille P et al.Structural and mechanical characterisation of boron and nitrogen implanted NiTi shape memory alloy[J].Surface and Coatings Technology,2002,158-159:309-317. |
[9] | 杨贤金,崔振铎,赵乃勤,宋文静,曾晟宇,朱胜利,姚康德.Ca/P层对NiTi形状记忆合金生物相容性的影响[J].材料研究学报,2000(05):481-484. |
[10] | 刘敬肖,杨大智.医用NiTi合金表面溶胶-凝胶法制备含磷TiO2薄膜[J].硅酸盐学报,2002(01):45-50. |
[11] | 刘敬肖,杨大智,徐久军,陈吉华,蔡英骥.离子束合成TiO2薄膜对医用NiTi合金表面的改性[J].材料研究学报,2001(04):445-450. |
[12] | Yue T M;Wu Y X;Man H C .Laser surface treatment of aluminum 6013/SiCp composite for corrosion resistance enhancement[J].Surface and Coatings Technology,1999,114:13-18. |
[13] | Man H C;Cui Z D;Yue T M .Corrosion properties of laser surface melted NiTi shape memory alloy[J].Scripta Materialia,2001,45:1447-1453. |
[14] | Munuea G;Gonzalez-Elipe A R;Espinos J P.XPS study of phase mobility in Ni/TiO2 system[J].Surface Science,1989:1113-1122. |
[15] | Trepanier C;Tabrizian M;Yahia L H et al.Effect of modification of oxide layer on NiTi stent corrosion resistance[J].Journal of Biomedical Materials Research,1998,43(04):433-440. |
[16] | Trigwell S.;Nelson KF.;Selvaduray G.;Hayden RD. .Effects of surface treatment on the surface chemistry of NiTi alloy for biomedical applications[J].Surface and Interface Analysis: SIA: An International Journal Devoted to the Development and Application of Techniques for the Analysis of Surfaces, Interfaces and Thin Films,1998(7):483-489. |
[17] | GreenSM;Grant D M;Wood J V .XPS characterization of surface modified Ni-Ti shape memory alloy[J].Materials Science and Engineering,1997,224:21-26. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%