欢迎登录材料期刊网

材料期刊网

高级检索

用等径弯曲通道变形(equal-channel angular pressing简称ECAP)法制备出超细晶低碳钢材料,并在不同退火条件下研究其组织的热稳定性.研究表明,在200~500℃之间退火时,材料组织处于回复阶段,其铁素体晶粒几乎没有长大,晶粒尺寸约0.4pm;在550℃退火时,铁素体组织由较大的再结晶晶粒和细小的未再结晶晶粒组成;在550℃相同条件下退火时,变形试样中的渗碳体与热轧态试样中的渗碳体相比,前者球化能力明显增强;600℃退火时再结晶完成.

参考文献

[1] Valiev RZ.;Alexandrov IV.;Islamgaliev RK. .Bulk nanostructured materials from severe plastic deformation [Review][J].Progress in materials science,2000(2):103-189.
[2] Segal V I;Reznikov A E;Drobyshevskiy.[J].Russian Metallurgy,1981(01):99-105.
[3] Alexandrov I V;Zhu Y T;Lowe T C et al.Consolidation of nanometer sized powders using severe plastic torsional straining[J].Nanostructured Materials,1998,110(01):45-54.
[4] Iwahashi Y;Wang J;Horita Z;et al. .Principle of equal-channel angular pressing for the processing of ultrafinegrained materials [J][J].Scripta Materialia,1996,35(02):143-146.
[5] Wang J;Horita Z;Furukawa M et al.An investigation of microstructural stability in Al-Mg alloy with submicrometer grain size[J].Acta Materialia,1996,44(07):2973-2982.
[6] Akihiro Yamashita;Zenji Horita;Terence G. Langdon .Improving the mechanical properties of magnesium and a magnesium alloy through severe plastic deformation[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2001(1/2):142-147.
[7] Neishi K;Uchida T;Yamauchi A et al.w-tmpratur suprpasticity in a Cu-Zn-Sn ay prcssd y svr pastic dfrmatin[J].Materials Science and Engineering,2001,A307:23-28.
[8] Vladimir V;Stolyarov;Yuntian T et al.Microstructure and properties of pure Ti processed by ECAP and cold extrusion[J].Materials Science and Engineering,2001,A303:82-89.
[9] Sastry S M;Mahapatra R N;Hasson D F .Microstructural refinement of Ti-44AI-11Nb by severe plastic deformation[J][J].Scripta Materialia,2000,42:731-736.
[10] Horita Z;Smith D et al.Evolution of grain boundary structure in submicrometer-grained Al-Mg alloy[J].Materials Characterization,1996,37:285-294.
[11] Read H G;Reynolds W T et al.APFIM and TEM studies of drawn pearlitic wire[J][J].Scripta Materialia,1997,37(08):1221-1230.
[12] Languillaume J;Kaoelski G;Baudelet B .Cementite dissolution in heavily cold drawn pearlitic wire[J].Acta Materialia,1997,44(03):1201-1212.
[13] Hong M H;Reynolds W J et al.Atom probe and TEM investigation of heavily drawn pearlitic steel wire[J].Metallurgical and Materials Transactions,1999,30:717-727.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%