采用水淬法制备出厚度为2mm的片状Mg65Cu25Y10非晶态合金,衡量其非晶成形能力的参数过冷液态区域宽度△Tx(△Tx=58.3K)、约化玻璃转变温度Trg(Trg=0.56)均较高,表明此合金具有很强的非晶形成能力;并测出了它的硬度为263.2HV.通过恒速升温和等温晶化试验,采用差热分析、X射线衍射等研究了它的热行为,结果表明,此合金在433K以下还是稳定的,如进一步升高温度,材料将由非晶态结构逐步向晶态结构转变,当退火温度达到623K时,则完全转变为晶态结构.
参考文献
| [1] | 向冬霞,曹建勇,王军.镁合金配件在汽车、摩托车上的应用[J].汽车工艺与材料,2002(08):41-43. |
| [2] | Ruden T J;Albright D L .High ductility magnesium alloys in automotive applications[J].Current Advances in Materials and Processes,1994,145(06):28-31. |
| [3] | 吕宜振;王渠东;曾小勤.镁合金在汽车上的应用现状[J].汽车技术,1999(08):28-31. |
| [4] | Mordike B L;Ebert T .Magnesium properties-application-potential[J].Materials Science and Engineering A,2001,302:37-45. |
| [5] | Inoue A .High strength bulk amorphous alloys with low critical cooling rates[J].Materials Transactions,1995,36:866-875. |
| [6] | Busch R.;Johnson WL.;Liu W. .Thermodynamics and kinetics of the Mg65Cu25Y10 bulk metallic glass forming liquid[J].Journal of Applied Physics,1998(8):4134-4141. |
| [7] | H. Men;M. C. Yang;J. Xu .Glass-Forming Ability of Mg-Cu-Co-Y Alloy[J].Materials Science Forum,2002(0):39-46. |
| [8] | Birgit Bartusch;Frank Schurack;Jurgen Eckert .High strength magnesium-based glass matrix composites[J].Materials transactions,2002(8):1979-1984. |
| [9] | Kato A;Inoue A et al.Consolidation and their mechanical properties of amorphous Mg87.5 Cu5 Y7.5 and Mg70 Ca10 Al20 powders produced by high press gas atomization[J].Materials Transactions,1995,36(07):977-981. |
| [10] | Kenji Amiya;Akihisa Inoue .Preparation of Bulk Glassy Mg_(65)Y_(10)Cu_(15)Ag_5Pd_5 Alloy of 12 mm in Diameter by Water Quenching[J].Materials transactions,2001(3):543-545. |
| [11] | Ma H.;Ma E.;Xu J. .A new Mg65Cu7.5Ni7.5Zn5Ag5Y10 bulk metallic glass with strong glass-forming ability[J].Journal of Materials Research,2003(10):2288-2291. |
| [12] | Ma H;Xu J;Ma E .Mg-based bulk metallic glass composites with plasticity and high strength[J].Applied Physics Letters,2003,83(14):2793-2795. |
| [13] | 徐映坤,徐坚.陶瓷颗粒增强Mg65Cu20Zn5Y10块体金属玻璃复合材料[J].金属学报,2004(07):726-730. |
| [14] | 门华,徐坚.Mg-CU-Zn-y块体金属玻璃的形成[J].金属学报,2001(12):1243-1246. |
| [15] | 周畅然,徐坚.添加AlN对机械合金化Zr65Al7.5CU17.5Ni10非晶态合金热稳定性的影响[J].材料研究学报,2001(03):279-286. |
| [16] | 蒲健,王敬丰,肖建中,崔崑.块体Pd82Si18非晶合金的制备及晶化行为研究[J].华中科技大学学报(自然科学版),2003(04):69-72. |
| [17] | 韩德伟.田荣璋金属硬度检测手册[M].长沙:中南大学出版社,2003 |
| [18] | 刘正;张奎;曾小勤.镁基轻质合金理论基础及其应用[M].北京:机械工业出版社,2002 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%