将15钢淬火-冷轧处理得到薄饼晶层状结构,在不同条件下对试样进行电脉冲处理,用TEM对组织结构进行对比观察,研究不同电脉冲处理条件对显微组织的影响.结果表明:电容量增加使温度升高达到再结晶温度是材料发生再结晶的主要因素,脉冲次数增加能促进材料再结晶;其它参数一定时,电容放电时间越短,组织细化效果越明显.
参考文献
| [1] | 谢建新;唐荻;毛卫民 等.低合金钢的现状和发展趋势[J].特殊钢,1998,19(05):1-4. |
| [2] | Xiao SH.;Zhou YZ.;Guo JD.;Wu SD.;Yao G.;Li SX.;He GH.;Zhou BL. .The effect of high current pulsing on persistent slip bands in fatigued copper single crystals[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):351-355. |
| [3] | 张伟,隋曼龄,周亦胄,李斗星.电脉冲下超硬铝合金中形成纳米铝的TEM观察与EDS分析[J].电子显微学报,2002(05):667-668. |
| [4] | Zhang W.;Sui M.L. .Formation of nanophases in a Cu-Zn alloy under high current density electropulsing[J].Journal of Materials Research,2000(10):2065-2068. |
| [5] | Hiroshi Mizubayashi;Natsuki Kameyama;Ting Hao et al.Crystallization under electropulsing suggesting a reasonant collective motion of many atoms and modification of thermodynamic parameters in amorphous alloys[J].Physical Review B:Condensed Matter,2001,11(64):1-10. |
| [6] | 何树先,王俊,孙宝德,周尧和.电脉冲对金属铝箔的作用[J].中国有色金属学报,2002(z1):173-177. |
| [7] | 奇,滕功清.电脉冲处理过程中试样温度的理论计算[J].北京机械工业学院学报(综合版),2001(03):54-57. |
| [8] | Mizubayashi H.;Hao T.;Tanimoto H. .Low temperature crystallization of amorphous alloys under electropulsing[J].Journal of Non-Crystalline Solids: A Journal Devoted to Oxide, Halide, Chalcogenide and Metallic Glasses, Amorphous Semiconductors, Non-Crystalline Films, Glass-Ceramics and Glassy Composites,2002(0):581-584. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%