利用电子背散射衍射(EBSD)技术和TEM分析方法研究了17CrNiMo6钢中一个形态上的packet内的板条马氏体的形态与晶体学特征.叙述了马氏体K-S关系的晶体学分析方法.结果表明:虽然真实马氏体取向与理想K-S关系有一定的分散,但是packet内6种变量符合K-S关系,6种K-S关系的变量之间有特定的结合.
参考文献
| [1] | S. Morito;H. Tanaka;R. Konishi .The morphology and crystallography of lath martensite in Fe-C alloys[J].Acta materialia,2003(6):1789-1799. |
| [2] | Inoue T;Matsuda S;Okamura Y et al.The fracture of a low carbon tempered martensite[J].Transactions of JIM,1970,11:36-43. |
| [3] | Swarr T E;Krauss G .The effect of structure on the deformation of as-quenched and tempered martensite in an Fe-0.2 pct alloy[J].Metallurgical Transactions A,1976,7(01):41-48. |
| [4] | T.C.Lindley;H.M.Flower .Electron backscattering diffraction study of acicular ferrite, bainite, and martensite steel microstructures[J].Materials Science and Technology: MST: A publication of the Institute of Metals,2000(1):26-40. |
| [5] | Kitahara H;Ueji R;Ueda M et al.Crystallographic analysis of plate martensite in Fe-28.5 at% Ni by FE-SEM/EBSD[J].Materials Characterization,2005,54(4-5):378-386. |
| [6] | S. MORITO;H. SALTO;T. OGAWA .Effect of austenite grain size on the morphology and crystallography of lath martensite in low carbon steels[J].ISIJ International,2005(1):91-94. |
| [7] | M. UEDA;H. Y. YASUDA;Y. UMAKOSHI .EFFECT OF GRAIN BOUNDARY CHARACTER ON THE MARTENSITIC TRANSFORMATION IN Fe-32at. percent NI BICRYSTALS[J].Acta materialia,2001(17):3421-3432. |
| [8] | Kitahara H;Ueji R;Tsuji N;Minamino Y .Crystallographic features of lath martensite in low-carbon steel[J].Acta materialia,2006(5):1279-1288. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%