WO3和CuO原料粉末经气流粉碎后,在H2气氛中进行共还原,制得了Cu含量为20%(wt%)的纳米W-Cu复合粉末;通过X射线衍射,透射电镜和扫描电镜等方法研究分析所制备W-Cu粉末的烧结行为和烧结体性能.结果表明:气流粉碎可以明显地降低WO3和CuO的粒度;通过对气流粉碎氧化物粉末进行共还原,可获得粒度为50～100nm的W-Cu复合粉末.该粉末烧结活性较高,其成形压坯在1200℃下于H2气氛中烧结后相对密度可达98%以上,且烧结体晶粒细小均匀.其抗弯强度和维氏硬度分别超过1000MPa和300MPa,电导率高于35%IACS.
参考文献
| [1] | Kang Hyun-Ki;Kang Suk Bong .Tungster/copper composite deposits produced by a cold spray[J].Scripta Materialia,2003,49(12):1169-1174. |
| [2] | Johnson J L;German R M .Advance in powder metallurgy and particulate materials[J].International Journal of Powder Metallurgy,1993,4(01):201-209. |
| [3] | 吕大铭.钨铜材料的生产、应用与发展[J].中国钨业,2004(05):69-74. |
| [4] | Yunping Li;Xuanhui Qu;ZhouShun Zheng .Properties of W-Cu composite powder produced by a thermo-mechanical method[J].International Journal of Refractory Metals & Hard Materials,2003(5/6):259-264. |
| [5] | Johnson J L;German R M .Chemically activated liquid phase sintering of tungsten copper[J].International Journal of Powder Metallurgy,1994,30(01):91-102. |
| [6] | Alam SN .Synthesis and characterization of W-Cu nanocomposites developed by mechanical alloying[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2006(1-2):161-168. |
| [7] | Kim B K;Choi C J .Fabrication of nanostructured powders by chemical processes[J].Scripta Materialia,2001,44(8-9):2161-2164. |
| [8] | G. G. Lee;G. H. Ha;B. K. Kim .Synthesis of high density ultrafine W/Cu composite alloy by mechano-thermochemical process[J].Powder Metallurgy,2000(1):79-82. |
| [9] | 杨成功,王尔德,于洋,李春峰.W-35%Cu液相活化烧结工艺研究[J].粉末冶金工业,2003(05):1-5. |
| [10] | Lee J S;Kim T H .Densification and microstructure of the nanocomposite W-Cu Powders[J].Nanostructured Materials,1995,6:691-694. |
| [11] | 杨明川,宋贞桢,卢柯.W-20%Cu纳米复合粉的制备[J].金属学报,2004(06):639-642. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%