欢迎登录材料期刊网

材料期刊网

高级检索

为了探讨Cr含量对类石墨碳(GLC)涂层硬度的影响机理,采用非平衡磁控溅射离子镀技术,通过调整Cr靶电流,制备出了具有不同Cr含量的GLC涂层.借助显微硬度计测量了涂层的硬度,利用X射线衍射(XRD)和X射线光电子能谱(XPS)分析了涂层的成分、相组成和主元素的价键结构.结果表明,Cr有显著软化GLC涂层的作用.随着Cr含量增加,GLC涂层中的sp3杂化碳的含量持续减小,sp2杂化碳的含量先增后减,而金属铬及碳铬化合物的含量则不断增大.上述因素对GLC涂层的硬度变化均有影响,而涂层中sp3杂化碳的含量随着Cr含量增加持续减小是造成GLC涂层硬度不断降低的主要原因.

参考文献

[1] 杜军,何家文.类石墨碳膜的制备及其与类金刚石碳膜的区分[J].中国表面工程,2005(04):6-8,12.
[2] S. Yang;D. G. Teer .Investigation of sputtered carbon and carbon/chromium multi-layered coatings[J].Surface & Coatings Technology,2000(1/3):412-416.
[3] Yang S.;Renevier NM.;Teer DG.;Li X. .Tribological properties and wear mechanism of sputtered C/Cr coating[J].Surface & Coatings Technology,2001(0):85-93.
[4] Puchi-Cabrera ES.;Berrios JA.;Teer DG. .On the computation of the absolute hardness of thin solid films[J].Surface & Coatings Technology,2002(2/3):185-196.
[5] Merel P.;Chaker M.;Moisa S.;Margot J.;Tabbal M. .Direct evaluation of the sp(3) content in diamond-like-carbon films by XPS[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,1998(1/2):105-110.
[6] T. Y. Leung;W. F. Man;P. K. Lim;W. C. Chan;F. Gaspari;S. Zukotynski .Determination of the sp~3/sp~2 ratio of a-C:H by XPS and XAES[J].Journal of Non-Crystalline Solids: A Journal Devoted to Oxide, Halide, Chalcogenide and Metallic Glasses, Amorphous Semiconductors, Non-Crystalline Films, Glass-Ceramics and Glassy Composites,1999(0):156-160.
[7] 阎兴斌,徐洮,王博,杨生荣.用XPS和XAES分析电化学沉积的DLC膜[J].无机化学学报,2003(06):569-573.
[8] 郑伟涛.薄膜材料与薄膜技术[M].北京:化学工业出版社,2004:260-275.
[9] Teer DG. .New solid lubricant coatings[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2001(2):1068-1074.
[10] Lee Hsin-chung .Mechanical properties and microstructure of chromium-containing diamond-like carbon coatings[D].Kaohsiung:National Sun Yat-sen University,2001.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%