对经不同规范火工处理的热轧铜沉淀强化钢进行了拉伸和冲击试验,采用透射电子显微镜对火工处理前后钢板的微观结构进行了分析.结果表明,峰值温度为850℃、不同冷却方式和处理次数的火工处理均使钢的强度降低、冲击韧性提高,且强韧性的变化幅度随着冷却速度的降低、处理次数的增多而增大;微观结构分析表明在火工处理过程中,α-Fe基体发生回复与再结晶,同时ε-Cu析出颗粒发生粗化,导致强度下降,韧性提高.
参考文献
| [1] | Czyryca E J .Advances in high strength steel technology for naval hull construction[J].Key Engineering Materials,1993,84-85:491-520. |
| [2] | Czyryca E J .Development of low-carbon,copper-strengthened HSLA steel plate for naval ship construction[ADA224341][R].,1990. |
| [3] | Weber R A;Somers B R;Kaufmann E J .Low-carbon,age-hardenable steels for use in construction:A Review[ADA3190097XSP][R].,1996. |
| [4] | 杨才福,张永权.新一代易焊接高强度高韧性船体钢的研究[J].钢铁,2001(11):50-54. |
| [5] | 杨才福,苏航,李丽,柴峰,张永权.高性能铜沉淀硬化船体钢[J].中国有色金属学报,2004(z1):211-216. |
| [6] | 林慧国;傅代直.钢的奥氏体转变曲线--原理、测试与应用[M].北京:机械工业出版社,1988:227-228. |
| [7] | Lis A K;Mujahid M;Garcia C I.The role of copper in the aging behavior of HSLA-100 plate steel[A].Pennsylvania:Iron and Steel Society,Inc,1992:129-138. |
| [8] | Mujahid M;Lis A K;Garcia C I et al.HSLA-100 steels:microstructure and properties[J].Key Engineering Materials,1993,84-85:209-236. |
| [9] | M. Mujahid;A. K. Lis;C. I. Garcia;A. J. DeArdo .HSLA-100 steels: influence of aging heat treatment on microstructure and properties[J].Journal of Materials Engineering and Performance,1998(2):247-257. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%