通过室温力学性能测试,光学显微镜、扫描电镜和透射电镜研究了淬火速率对AlZnMgCu(Zr)合金断裂行为的影响.结果表明:含Zr小于0.1%合金随着淬火速率的降低,由穿晶破断和沿晶开裂的混合型断裂逐渐转变成沿晶断裂;其主要原因是淬火速率降低使晶界无沉淀析出带(PFZ)宽化.含Zr大于等于0.1%的合金随着淬火速率的降低由穿晶破断为主的断裂逐渐转变成沿晶开裂和穿晶剪切的混合型断裂;沿晶断裂的产生主要是由于晶界无沉淀析出带宽化;穿晶剪切主要是由于慢速淬火过程中晶粒内部析出了大量粗大的η平衡相.
参考文献
| [1] | Hahn G T;Rosenfield A R .Metallurgical factors affecting fracture toughness of aluminum alloys[J].Metallurgical & Materials Transactions A:Physical Metallurgy & Materials Science,1975,6:653-668. |
| [2] | Liu G.;Zhang GJ.;Ding XD.;Sun J.;Chen KH. .Dependence of fracture toughness on multiscale second phase particles in high strength Al alloys[J].Materials Science and Technology: MST: A publication of the Institute of Metals,2003(7):887-896. |
| [3] | 陈昌麒.高强铝合金穿晶剪切断裂研究[J].北京航空航天大学学报,2002(05):519-523. |
| [4] | De Haas M.;De Hosson JTM. .On the effects of thermomechanical processing on failure mode in precipitation-hardened aluminium alloys[J].Journal of Materials Science,2002(23):5065-5073. |
| [5] | Sanders R E Jr;Starke E A Jr .Effect of intermediate thermomechanical treatments on the fatigue properties of a 7050 aluminum alloy[J].Metallurgical & Materials Transactions A:Physical Metallurgy & Materials Science,1978,9:1087-1100. |
| [6] | Kanghua Chen;Hongwei Liu;Zhuo Zhang .The improvement of constituent dissolution and mechanical properties of 7055 aluminum alloy by stepped heat treatments[J].Journal of Materials Processing Technology,2003(1):190-196. |
| [7] | Morere B.;Ehrstrom J.C. .Microstructural Effects on Fracture Toughness in M7010 Plate[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2000(10):2503-2515. |
| [8] | Deschamps A.;Brechet Y. .Influence of quench and heating rates on the ageing response of an Al-Zn-Mg-(Zr) alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(1/2):200-207. |
| [9] | Engler O;Sachot E;Ehrstr(o)m J C.Recrystallisation and texture in hot deformed aluminium alloy 7010 thick plates[J].Materials Science and Technology,1996(12):717-729. |
| [10] | L. K. BERG;J. GJONNES;V. HANSEN .GP-ZONES IN Al-Zn-Mg ALLOYS AND THEIR ROLE IN ARTIFICIAL AGING[J].Acta materialia,2001(17):3443-3451. |
| [11] | Porter D A;Easterling K E.Phase transformation in metals and alloys[M].Britain:Oxford,Alden Press,1981 |
| [12] | D. Dumont;A. Deschamps;Y. Brechet;C. Sigli;J. C. Ehrstrom .Characterisation of precipitation microstructures in aluminium alloys 7040 and 7050 and their relationship to mechanical behaviour[J].Materials Science and Technology: MST: A publication of the Institute of Metals,2004(5):567-576. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%