通过高速混合、冷压烧结成型法用玻璃纤维(GF)填充聚四氟乙烯(PTFE)制备了GF/PTFE复合材料,探讨了GF用量对GF/PTFE复合材料拉伸性能和摩擦磨损性能的影响,用扫描电子显微镜(SEM)对复合材料微观结构进行了分析研究.结果表明:GF质量分数为15%时,复合材料耐磨性能最好,磨耗量不足1.0×10-3g/h,拉伸强度与常规干法混合制备的复合材料相比提高近30%,高速混合工艺使GF均匀分布于PTFE基体中,并可进一步细化PTFE粉料.
参考文献
| [1] | 石安富;龚云表.工程塑料--性能、成型、应用[M].上海:上海科学技术出版社,1986 |
| [2] | 缪京媛;叶牧.氟塑料加工与应用[M].北京:化学工业出版社,1987 |
| [3] | Gerlinde Kempe;Hans-Joachim Kunne;Gunther Lassig;Wolfgang Tietze;Reinhard Zettl .Development of Gaskets on the Basis of New PTFE Microfibres[J].Chemical Engineering & Technology: Industrial Chemistry -Plant Equipment -Process Engineering -Biotechnology,1998(11):869-872. |
| [4] | Kazutaka Hosokawa;Tatsuro Uchida;Shinichi Yano et al.Modified Polytetrafluoroethylene Fine Powder and Process for Preparing the Same[P].US,6747108B1,2004-06-08. |
| [5] | Atsunori Koshirai;Nobuhisa Takayama;Akira Yanagase .Polytetrafluoroethylene-containing Powder Mixtures,Thermoplastic Resin Compositions Including Same and Molded Articles Made Therefrom[P].US,6025441,2000-02-15. |
| [6] | Takahiro Kitahara;Kazutaka Hosokawa;Tetsuo Shimizu .Polytetrafluoroethylene Fine Powders and Their Use[P].US,6503988B1,2003-01-07. |
| [7] | 颜录科,寇开昌,张飞,丁美平.改性聚四氟乙烯的研究进展[J].中国塑料,2007(05):6-10. |
| [8] | 卡茨 HS;米路西凯 J V.塑料用填料及增强剂手册[M].北京:化学工业出版社,1982 |
| [9] | Bahadur S;Zheng Y .Mechanical and Tribological Behaviour of Polyester Reinforced with Short Glass Fibers[J].Wear,1990,137(02):251-266. |
| [10] | Unal H;Mimaroglu A;Kadioglu D et al.Sliding Friction and Wear Behaviour of Polytetrafluoroethylene and Its Composites Under Dry Conditions[J].Materials & Design,2004,25(03):239-245. |
| [11] | Talat Tevruz .Tribological behaviours of carbon filled polytetrafluoroethylene(PTFE) dry journal bearings[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,1998(1):61-68. |
| [12] | 汪怀远,冯新,史以俊,何鹏,陆小华.不同介质中聚四氟乙烯复合材料的摩擦磨损性能[J].化工学报,2007(04):1053-1058. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%