以沸腾的核乏燃料后处理模拟料液及空白硝酸溶液为腐蚀液,研究了Ti35合金焊接接头的耐腐蚀性能.在模拟料液中对Ti35合金熔敷金属及焊接热模拟样进行全浸腐蚀实验,间接评价了焊接接头熔区及热影响区的耐腐蚀性能.结果表明:Ti35合金焊接接头在沸腾空白硝酸溶液及模拟料液中均具有良好的均匀腐蚀性能,焊缝熔区及热影响区的腐蚀速率大于焊接接头的腐蚀速率,焊接接头的腐蚀对焊接应力的敏感性不高；在沸腾空白硝酸介质中,硝酸浓度对焊接接头的耐蚀性能有较大的影响,随硝酸浓度的提高,焊接接头的耐蚀性能有所下降；硝酸溶液中氧化性金属阳离子对Ti35合金的焊接接头具有缓蚀作用.
参考文献
| [1] | Nuclear fission power for 21st century needs: Enabling technologies for large-scale, low-risk, affordable nuclear electricity[J].Progress in nuclear engergy,2008(2/6):p.82-91. |
| [2] | P.K. Dey;N.K. Bansal .Spent fuel reprocessing: A vital link in Indian nuclear power program[J].Nuclear engineering and design,2006(7/8):723-729. |
| [3] | Baldev Raj;U. Kamachi Mudali .Materials development and corrosion problems in nuclear fuel reprocessing plants[J].Progress in Nuclear Energy,2006(4):283-313. |
| [4] | Fauvet P;Balbaud F;Robin R;Tran QT;Mugnier A;Espinoux D .Corrosion mechanisms of austenitic stainless steels in nitric media used in reprocessing plants[J].Journal of Nuclear Materials: Materials Aspects of Fission and Fusion,2008(1):52-64. |
| [5] | Kiuchi K;Hayakawa H;Takagi Y.New alloy development for fuel reprocessing plant materials used in nitric acid solutions[A].London:British Nuclear Industry Forum,1995:284-286. |
| [6] | Kapoor K.;Kain V.;Gopalkrishna T.;Sanyal T.;De PK. .High corrosion resistant Ti-5%Ta-1.8%Nb alloy for fuel reprocessing application[J].Journal of Nuclear Materials: Materials Aspects of Fission and Fusion,2003(1):36-44. |
| [7] | Shankar AR;Dayal RK;Balasubramaniam R;Raju VR;Mythili R;Saroja S;Vijayalakshmi M;Raghunathan VS .Effect of heat treatment on the corrosion behaviour of Ti-5Ta-1.8Nb alloy in boiling concentrated nitric acid[J].Journal of Nuclear Materials: Materials Aspects of Fission and Fusion,2008(2/3):277-284. |
| [8] | Takafumi Motooka;Kiyoshi Kiuchi .Corrosion fatigue of refractory materials in boiling nitric acid[J].Materials transactions,2002(5):1220-1224. |
| [9] | Karen Alves de Souza;Alain Robin .Preparation and characterization of TI-Ta alloys for application in corrosive media[J].Materials Letters,2003(20):3010-3016. |
| [10] | 徐潇潇,崔岚,邱绍宇,李思凡,盛钟琦,邰江.Ti-5%Ta钛合金在乏燃料模拟溶解液中的腐蚀行为[J].核动力工程,2005(04):406-409. |
| [11] | Yamamot Takao;Tsukui Shigeki;Okamoto Shinichi et al.Gamma-ray irradiation effect on corrosion rates of stainless steel,Ti and Ti-5Ta in boiling 9N nitric acid[J].Journal of Nuclear Materials,1996,228:162-167. |
| [12] | M. Dadfar;M.H. Fathi;F. Karimzadeh .Effect of TIG welding on corrosion behavior of 316L stainless steel[J].Materials Letters,2007(11/12):2343-2346. |
| [13] | A.B.M. Mujibur Rahman;S. Kumar;A.R. Gerson .Galvanic corrosion of laser weldments of AA6061 aluminium alloy[J].Corrosion Science: The Journal on Environmental Degradation of Materials and its Control,2007(12):4339-4351. |
| [14] | A. Ravi Shankar;V.R. Raju;M. Narayana Rao;U. Kamachi Mudali;H.S. Khatak;Baldev Raj .Corrosion of Zircaloy-4 and its welds in nitric acid medium[J].Corrosion Science: The Journal on Environmental Degradation of Materials and its Control,2007(9):3527-3538. |
| [15] | Karthikeyan T;Dasgupta A;Saroja S;Vijayalakshmi M;Raghunathan VS .Studies on weldability of Ti-5Ta-1.8Nb alloy[J].Journal of Nuclear Materials: Materials Aspects of Fission and Fusion,2004(3):299-301. |
| [16] | 吴金平;杨英丽;赵彬 等.Ti35钛合金的焊接组织与性能[J].稀有金属材料与工程,2008,37(增刊3):205-208. |
| [17] | 吴金平;杨英丽;赵恒章 等.焊接热循环对Ti35钛合金组织性能的影响[J].中国有色金属学报,2010,20(增刊1):650-653. |
| [18] | Takafumi Motooka;Kiyoshi Kiuchi .Corrosion fatigue of refractory materials in boiling nitric acid[J].Materials transactions,2002(5):1220-1224. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%