欢迎登录材料期刊网

材料期刊网

中国科学院金属研究所 科学出版社
高级检索
  1. 首页
  2. 期刊
  3. 材料与冶金学报
  4. 金属凝固微观组织数值模拟研究进展

材料与冶金学报, 2002, 1(2): 95-101. doi: 10.3969/j.issn.1671-6620.2002.02.004

金属凝固微观组织数值模拟研究进展

李斌 1, , 王恩刚 2, , 张红伟 3, , 赫冀成 4,

1.东北大学,材料电磁过程研究教育部重点实验室,辽宁,沈阳,110004

2.东北大学,材料电磁过程研究教育部重点实验室,辽宁,沈阳,110004

3.东北大学,材料电磁过程研究教育部重点实验室,辽宁,沈阳,110004

4.东北大学,材料电磁过程研究教育部重点实验室,辽宁,沈阳,110004

基金项目:   国家重点基础研究发展计划(973计划)(G1998061510)  

关键词： 凝固 , 微观组织 , 数值模拟 , MCA法

Progress in Numerical Simulation of Solidification Microstructures of Metals

综述了金属凝固微观组织数值模拟研究在国内外的研究进展,阐述了该研究领域主要采用的三种模拟方法(确定性方法、随机性方法、相场方法).并着重介绍了最新的改进单元自动控制法(MCA法)的求解和模拟过程,指出了该研究领域目前存在的问题及今后的发展方向.

参考文献

[1] 熊玉华;刘林 .铸件凝固组织形成的计算机模拟[J].材料导报,1999,13(03):20-21.
[2] 柳百成;荆涛.铸造工程的模拟仿真与质量控制[M].北京:机械工业出版社,2001
[3] Oldfield W .A Quantitative Approach to casting Solidification[J].Freezing of Cast Iron ASM Trans,1966,59(02):945-960.
[4] Hunt J D .Steady State Columnar and Equiaxed Growth of Dendrites and Eutectic[J].Materials Science and Engineering,1984,65:75-83.
[5] THEVOZ PH;Desbiolies J L;Rappaz M .Modeling of Equiaxed Microstructure Formation in Casting[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1989,20:311-321.
[6] Rappaz M;Thevoz Ph .Solute Diffusion Model for Exquiaxed Dendritic Growth[J].Acta Materialia,1987(35):1487-1497.
[7] Rappaz M;Thevoz Ph .Solute Diffusion Model for Exquiaxed Dendritic Growth:Analytical Solution[J].Acta Materialia,1987,35(12):2929-2933.
[8] Wang C Y;Beckermann C .Prediction of Columnar to Equiaxed Transition during Diffusion-Controlled Dendritic Alloy Solidification[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1994,25:1081-1093.
[9] Wang C Y;Beckermann C .Equiaxed Dendritic Solidification with Convection Multiscale/Multiphase Modeling[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1996,27(09):2754-2764.
[10] Wang C Y;Beckermann C .Equiaxed Dendritic Solidification with Convection Numerical Simulations for an Al -4wtpctCu Alloy[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1996,27(09):2765-2783.
[11] Spittle J A;Brown S G R .Computer Simulation of the Effects of Alloy Variables on the Grain Structures of Castings[J].Acta Materialia,1989,37(07):1803-1810.
[12] Spittle J A;Brown S G R .A Computer Simulation of the Influence of Processing Condition on As-cast Grain Structures[J].Journal of Materials Science,1989,23:1777-1781.
[13] Zhu P;Smith R W .Dynamic Simulation of Crystal Growth by Monte Carlo Method I Model Description and Kinetics[J].Acta Materialia,1992,40(04):683-692.
[14] Zhu P;Smith R W .Dynamic Simulation of Crystal Growth by Monte Carlo Method Ⅱ Ingot Microstructures[J].Acta Materialia,1992,40(12):3369-3379.
[15] Rappaz M;Gandin Ch A .Probabilistic modeling of microstructure formation in solidification process[J].Acta Materialia,1993,41(02):345-360.
[16] Rappaz M;Charbon Ch;Sasikumar R .[J].Acta Materialia,1994,42:2365-2374.
[17] Gandin Ch A;Rappaz M .A Coupled Finite Element-Cellular Automation Model for the Prediction of Dendritic Grain Structures in Solidification Process[J].Acta Materialia,1994,42(07):2223-2246.
[18] Gandin Ch A;Rappaz M;Trivedi R .Three DimensionalSimulation of the Grain Formation in Investment Casting[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1994,25(02):629-637.
[19] Rappaz M.;Gandin C.H. .Prediction of Grain Structures in Various Solidification Processes[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,1996(3):695-705.
[20] Gandin Ch A;Rappaz M;Trivedi R .Three Dimensional Probabilistic Simulation of Solidification Grain Structures[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1993,24(02):467-479.
[21] Gandin Ch A;Desbiolies J L;Rappaz M et al.Grain Texture Evaluation during Columnar Growth of Dendritic Alloys[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1999,30:3153-3162.
[22] Lee K Y;Hong C P .Stochastic Modeling of Solidification Grain Structure of Al-Cu Crystal Line Ribbons in Planar Casting[J].ISIJ International,1997,37(01):38-46.
[23] Cho I S;Hong C P .Modeling of Microstructural Evolution in Squeeze Casting of an Al-45mass%Cu Alloy[J].ISIJ International,1997,37(11):1098-1106.
[24] S.Y.Lee;S.M.Lee .Numerical modeling of deflected columnar dendritic grains solidified in a flowing melt and its experimental verification[J].ISIJ International,2000(1):48-58.
[25] Cho S H .Contribution of Nucleation Process to Grain Formation in Calculating Solidification Microstructure by CADFD[R].Tokyo.Japan,2000.
[26] M.F.ZHU;C.P.HONG .A Modified Cellular Automaton Model for the Simulation of Dendritic Growth in Solidification of Alloys[J].ISIJ International,2001(5):436-445.
[27] ZHU M F;Kim J M;Hong C P .Modeling of Globular and Dendritic Structure Evolution in Solidification of an Al7mass%Si Alloy[J].ISIJ International,2001,41(09):992-998.
[28] S.R. CHANG;J.M. KIM;C.P. HONG .Numerical Simulation of Microstructure Evolution of An Alloys in Centrifugal Casting[J].ISIJ International,2001(7):738-747.
[29] 于艳梅,A.Karma,C.Beckermann.相场法凝固组织模拟的研究进展[J].铸造,2000(09):507.
[30] Collins J B;Levin H .Diffuse Interface Model of DiffusionLimited Crystal Growth[J].Physical Review B,1985,31(09):6119-6122.
[31] Caginalp G;Fife P C .Dynamics of Layered Interfaces Arising From Phase Boundaries[J].SIAM Journal on Applied Mathematics,1988,48(03):506-510.
[32] Caginalp G .Stefan and Hele-Shaw Type Model as Asymptotic Limits of the Phase-field Equations[J].Physical Review A,1989,39(11):5887-5890.
[33] Fife P C;Gill G S .Phase Transition Mechanism Ms for the Phase-field Model under Internal Heating[J].Physical Review A,1991,43(02):843-851.
[34] Kobayashi R .Modeling and Numerical Simulations of Dendritic Crystal Growth[J].Physical Review D,1993,63(10):410-423.
[35] Karma A;Rappel WJ .Phase-field Method for Computationally Efficient Modeling of Solidification with Arbitrary Interface Kinetics[J].Physical Review E,1996,53(04):R3017-3020.
[36] Karma A;Rappel W J .Numerical Simulation of Three-dimensional Dendritic Growth[J].Physical Review Letters,1996,77(10):4050-4053.
[37] Tonhardt R.;Amberg G. .Phase-field simulation of dendritic growth in a shear flow[J].Journal of Crystal Growth,1998(3/4):406-425.
[38] Kim SG.;Suzuki T.;Kim WT. .Interfacial compositions of solid and liquid in a phase-field model with finite interface thickness for isothermal solidification in binary alloys[J].Physical review.E.Statistical physics, plasmas, fluids, and related interdisciplinary topics,1998(3 Pt.b):3316-3323.
[39] LEE J S;Suzuki T .Numerical Simulation of Isothermal Dendritic Growth by Phase-field Model[J].ISIJ International,1999,39(03):246-252.
[40] Seong Gyoon KIM;Won Tae KIM;Jae Sang LEE .Large Scale Simulation of Dendritic Growth in Pure Undercooled Melt by Phase-field Model[J].ISIJ International,1999(4):335-340.
[41] Tong X.;Karma A.;Beckermann C. .Velocity and shape selection of dendritic crystals in a forced flow[J].Physical review.E.Statistical physics, plasmas, fluids, and related interdisciplinary topics,2000(1):R49-R52.
[42] ZHU M F;Kim J M;Hong C P .Numerical Prediction of the Secondary Dendrite Arm Spacing Using a Phase-field Model[J].ISIJ International,2001,41(04):345-349.
[43] 许庆彦,柳百成.采用Cellular Automaton法模拟铝合金的微观组织[J].中国机械工程,2001(03):328-331.
[44] 赵海东,柳百成,刘蔚羽,王东涛.球墨铸铁件微观组织的数值模拟[J].机械工程学报,2000(02):76-80.
[45] 金俊泽;王宗廷;郑贤淑 等.金属凝固组织形成的仿真研究[J].金属学报,1998,34(09):928-932.
[46] 唐勇;金俊泽 .金属凝固组织的计算机仿真[J].大连理工大学学报,1997,37(05):560-563.
[47] 王同敏;金俊泽.铸件凝固过程微观模拟研究进展[J].铸造,1999(05):41-46.
[48] Maxwell I;Hellawell A .A Simple Model for Grain Refinement during Solidification[J].Acta Materialia,1975,23:229-237.
[49] Stefanescu D M;Upadhya G;Bandyopadhyay D .Heat Transfer-Solidification Kinetics Modeling of Solidification of Castings[J].Materials Transactions,1990,21:997-1005.
[50] Jackson K A;Hunt J D .Lamellar and Rod Eutectic Growth[J].Transactions of the Metallurgical Society of AIME,1966,236:1129-1142.
[51] Fisher D J;Kurz W .A Theory of Branching Limited Growth of Irregular Eutectics[J].Acta Materialia,1980,28:777.
[52] Lipton J;Glicksman M E;Kurz W .Equiaxed DendriteGrowth in Alloys at small Supercooling[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1989,18:341-345.
[53] Lipton J;Glicksman M E;Kurz W .Dendritic Growth into Undercoolod Alloy Melts[J].Materials Science and Engineering,1984,65:57-63.
[54] Kurz W;Giovanola B;Trivedi R .Theory of microstructural development during rapid solidification[J].Acta Materialia,1986,34(05):823-830.
[55] Brody H D;Flemings M C .Solute Redistribution in Dendritic Solidification[J].Transactions AIME,1966,236:615.
[56] Dustin I;Kurz W.[J].Metallkd,1986:265.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
作者相关
文章评分
  • 您的评分：
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%

版权所有©2010中国科学院金属研究所中国科技出版传媒股份有限公司

本系统由北京仁和汇智信息技术有限公司设计开发

技术支持：info@rhhz.net