应用粉末冶金烧结合金化及温压成形技术,制备了Fe-Mo-Mn-Cu-W-C烧结硬化钢摩檫材料,研究了该材料的组织结构和性能.结果表明:加入经过特殊处理的合金化元素后,烧结硬化钢的主要金相组织为珠光体、下贝氏体以及少量铁素体,材料的密度、强度、硬度及基体的耐磨性大幅度提高.Mn-Mo合金在高碳保护下加入到基体中,在烧结过程中产生了部分液相,因而促进了致密化过程.W以碳化物的形式加入到Fe-Mn-Mo-Cu-C烧结硬化钢基体中,起到了弥散强化的作用,材料的磨损量显著降低.
参考文献
[1] | 张晓明,邸洪双,刘相华,王国栋.双辊铸轧高速钢薄带退火时碳化物的球化机理[J].东北大学学报(自然科学版),2002(11):1097-1100. |
[2] | 北京粉末冶金机床配件厂.国外粉末冶金汽车零件[M].北京:机械工业出版社,1973:13-14. |
[3] | Hamiuddin M .Increasing mechanical properties of steels containing transitionmetalcarbides master alloy MCM and phosphorus[J].The Int J Powder Metal1 Powder Technol,1984,20(04):343-350. |
[4] | Zapf G;Hoffmann G;Dalal K .Effect of additional alloying elements on properties of sintered manganese steels[J].Powder Metallurgy International,1975,18(35):214-236. |
[5] | Banerjee S;Gemenetzis V;Thtümmler F .Liquid phase formation during sintering of low -alloy steels with carbide-base master alloy additions[J].Powder Metallurgy International,1980,12(03):126-129. |
[6] | Hausner H H;Taubenblatt P W.Modern developments in powder metallurgy[M].Princeton:MPIF/APMI,1977:129-152. |
[7] | Zhou C;Moon J R .Properties of high density iron based composites made by rotary forging and sintering[J].Powder Metallurgy International,1991,34(03):205-211. |
[8] | Kattamis T Z;Suganuma T .Solidification processing and tribological behavior of particulate TiC-ferrous matrix composites[J].Materials Science and Engineering A,1990,A128(02):241-252. |
[9] | E. Pagounis;M. Talvitie;V. K. Lindroos .Microstructure and mechanical properties of hot work tool steel matrix composites produced by hot isostatic pressing[J].Powder Metallurgy,1997(1):55-61. |
[10] | Fucheng Zhang;Ming Zhang .Effect of distribution of carbon and alloying element on martensite transformation in metastable austenitric manganese steel[J].Journal of Materials Science Letters,2003,22(08):573-574. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%