通过一系列薄带异步轧制的实验,给出了压下率、轧制速度、轧件宽度及润滑条件等参数对轧制力和轧制力矩的影响.轧制力和轧制力矩随着轧件压下率、轧件宽度的增加而增加;轧制速度增加时,轧制力和轧制力矩降低;在轧件涂抹润滑剂的轧制条件下,轧制力和轧制力矩也降低.轧制完成后,薄带的表面粗糙度的值减少.同时也探讨了异径轧制过程中轧件表面的粗糙度的演变.
参考文献
| [1] | Pan D;Sansome D H .An experimental study of the effect of roll speed mismatch on the rolling load during the cold rolling of the thin strip[J].Mech Work Technol,1982,16:361-371. |
| [2] | Yeong-Maw Hwang;Gow-Yi Tzou .Analytical and experimental study on asymmetrical sheet rolling[J].International Journal of Mechanical Sciences,1997(3):289-303. |
| [3] | Z.Y. Jiang;H.T. Zhu;A.K. Tieu .Study of work roll edge contact in asymmetrical rolling by modified influence function method[J].Journal of Materials Processing Technology,2005(0):512-518. |
| [4] | Z. Y. Jiang;H. T. Zhu;A. K. Tieu;W. H. Sun .Modelling of work roll edge contact in thin strip rolling[J].Journal of Materials Processing Technology,2004(0):1280-1285. |
| [5] | Edwards W J;Spooner P D.Analysis of strip shape[A].The Iron and Steel Institute,1973:177-212. |
| [6] | Hwu Y J;Lenard J G .Phase transformation temperatures of an ultra-low carbon steel[J].ASME Transactions,1988,110:22-27. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%