利用有限元软件ABAQUS/Standard对连铸结晶器和板坯进行了三维瞬态热传导数值分析,数值模拟计算了温度场.假设相变是在恒温下进行的,三维瞬态热传导方程中引入了潜热,即模拟过程考虑了金属结晶过程中释放的热量.同时也考虑了运动的板坯与结晶器之间的相互作用,从而获得了更准确的连铸过程中结晶器和板坯的温度场分布.
参考文献
| [1] | 邹俊苏,刘喜海,张喜娥.连铸结晶器铜板温度场数值模拟研究[J].钢铁研究,2002(05):5-6,34. |
| [2] | 杨甲申,赵敏,张继强.连铸机结晶器铜板温度场分析[J].重型机械,2003(06):12-14. |
| [3] | Hans-Günter Wobker,Gerhard Hugenschütt,Dietmar Kolbeck.应用FEM数值模拟优化连铸结晶器[J].钢铁,2003(08):55-58. |
| [4] | 严波,吕欣,张晓敏.连铸结晶器内钢液凝固热传导有限元方法[J].重庆大学学报(自然科学版),2004(04):114-117. |
| [5] | 蔡开科;程士富.连续铸钢原理与工艺[M].北京:冶金工业出版社,2002 |
| [6] | 李波;李伟.结晶器铜板温度计算[J].一重技术,1996(04):73-76. |
| [7] | A. E. Huespe;A. Cardona;V. Fachinotti .Thermomechanical model of a continuous casting process[J].Computer Methods in Applied Mechanics and Engineering,2000(3-4):439-455. |
| [8] | Z. Shi;Z.X. Guo .Numerical heat transfer modelling for wire casting[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2004(1/2):311-317. |
| [9] | I. Janik;H. Dyja;S. Berski .Two-dimensional thermomechanical analysis of continuous casting process[J].Journal of Materials Processing Technology,2004(0):578-582. |
| [10] | M. Janik;H. Dyja .Modelling of three-dimensional temperature field inside the mould during continuous casting of steel[J].Journal of Materials Processing Technology,2004(0):177-182. |
| [11] | Sergey V. Shepel;Samuel Paolucci .Numerical simulation of filling and solidification of permanent mold castings[J].Applied thermal engineering: Design, processes, equipment, economics,2002(2):229-248. |
| [12] | de Saracibar CA.;Chiumenti M.;Cervera M. .On the constitutive modeling of coupled thermomechanical phase-change problems[J].International Journal of Plasticity,2001(12):1565-1622. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%