使用高速摄像仪采集了板坯连铸结晶器水模内气泡运动的图像,对图像进行了数字处理.结果表明,含气率在结晶器流场内上回流区和射流区呈现"L",形分布;在下回流区呈"V"形分布.本实验条件下气泡的算术平均直径为2.6 mm,不同气量对气泡大小分布几乎没有影响.分区域讨论气泡的表观速度分布比全流场研究更加合适.
参考文献
[1] | 吕术森,陈雪莉,于广锁,于遵宏.应用电导探针测定鼓泡塔内气泡参数[J].化学反应工程与工艺,2003(04):344-351. |
[2] | 李小明,冯全科,毕勤成,陈听宽.利用红外对管进行无干扰气泡上升速度测量的实验研究[J].西安交通大学学报,2004(11):1110-1113,1118. |
[3] | Yamaguehi T;Iguchi M;UemuraT et al.Behavior of a small single bubble rising in a romting flow field[J].Society for Experimental Mechanics,2004,44:533-540. |
[4] | Bai H;Thomas B G .Bubble formation during hofizonml gas injection into downward-flowing liquid[J].Metallurgieal and Materials Transactions B,2001,32B:1143-1159. |
[5] | Iguchi M.;Kasai N. .Water Model Study of Horizontal Molten Steel-Ar Two-Phase Jet in a Continuous Casting Mold[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2000(3):453-460. |
[6] | V. Chevrier;A. W. Cramb .Observation and measurement of bubble separation at liquid steel-slag interfaces[J].Scandinavian Journal of Metallurgy,2005(2):89-99. |
[7] | Zhang LF;Yang S;Cai K K et al.Investigation of fluid flow and steel cleanliness in the continuous casting strand[J].Metallurgical and Materials Transactions B The Minerals Metals & Materials Society and ASM International,2007,63-83 |
[8] | R. SANCHEZ-PEREZ;R. D. MORALES;L. GARCIA-DEMEDICES .Dynamics of Coupled and Uncoupled Two-Phase Flows in a Slab Mold[J].Metallurgical and Materials Transactions, B. Process metallurgy and materials processing science,2004(1):85-99. |
[9] | 冯巍,胡明谦,李德强,刘承军,姜茂发.水口吹氩工艺板坯结晶器内气泡运动行为的物理模拟[J].特殊钢,2007(05):28-30. |
[10] | Gert Abbel;Wout Damen;Geert de Gendt et al.Argon bubble in slabs[J].ISU International,1996,36(zk):219-222. |
[11] | 朱苗勇;萧泽强.钢的精炼过程数学物理模拟[M].北京:冶金工业出版社,1998 |
[12] | Zhang L F;Thomas B G .Inclusion removed by bubble flotation in a continuous casting mold[J].Metallurgical and Materials Tmasactious B,2006,37B:361-379. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%