首先选用磷酸和丙三醇对铝基片进行电化学抛光,之后以草酸为电解液,利用电化学阳极氧化法制备多孔有序阳极氧化铝阵列模板,用高倍扫描电镜对其形貌进行表征.研究了电解电流、电解液浓度、温度等条件对氧化铝膜结构的影响.结果表明:用丙三醇与磷酸(体积比为9:1)作为电化学抛光液对铝基片进行抛光,抛光效果明显,铝基片的表面洁净;说明了电流、浓度、温度等对氧化铝膜的影响.
参考文献
| [1] | Montero-Moreno JM;Sarret M;Muller C .Influence of the aluminum surface on the final results of a two-step anodizing[J].Surface & Coatings Technology,2007(14):6352-6357. |
| [2] | Yu Chenun;Flu Chichang;BaiAllen et al.Pore-size dependence of AAO films on surface roughness of Al-1050 sheets controlled by electrepolishing coupled with fractional factorial des[J].Surface and Coatings Technology,2007,201:7259-7265. |
| [3] | 方景礼.金属材料抛光技术(Fang Jing-li.Metal material polishing technology[M].Beijing:National Defence industry press,2005:127)[M].北京:国防工业出版社,2005:127. |
| [4] | Min Tang;Jianping He;Jianhua Zhou .Pore-widening with the assistance of ultrasonic: A novel process for preparing porous anodic aluminum oxide membrane[J].Materials Letters,2006(17/18):2098-2100. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%