欢迎登录材料期刊网

材料期刊网

高级检索

以高纯镁砂、西藏铬矿细粉为原料,分别添加0%,2%,4%,6%(质量分数)的金属Cr粉末,在200 MPa下制成50 mm×20 mm的试样,然后在1 600 ℃,空气气氛下保温8 h烧成.对烧成后的试样进行性能检测以及XRD分析.结果表明,添加金属Cr粉末有利于MgCr2O4尖晶石相的生成.试样的显气孔率、体积变化随着金属Cr添加量的增加而增大,常温耐压强度随着添加量的增加出现明显下降.

参考文献

[1] Lee Y;Nassaralla C L .Formation of hexavalent chromium by reaction between slag and magnesite-chrome refractory[J].Metallurgical and Materials Transactions,1998,29B(02):405-410.
[2] Lee Y;Nassaralla C L .Minimization of hexavalent chromium in magnesite-chrome refractory[J].Metallurgical and Materials Transactions,1997,28B(05):855-859.
[3] Hiragushi K;Mihashi H;Yamaguchi A.Hexa-valent chromium in used magnesia chrome refractories and its removal by carbon reduction[A].Berlin,Germany,1999:257-260.
[4] 吉田毅;川本英司;小原学.セメントータリーキルン使用後MgO-Cr2O3れんがの再加熱処理方法[A].,1996:86-96.
[5] 王诚训;张义先.镁铬铝系耐火材料[M].北京:冶金工业出版社,1995
[6] TSUNEO KITAL;HIROAKI OSAKI;TETSUO YAMAMOTO .Influence of Grain Size Distribution in Mixture on Magnesia-Chrome Bricks[J].Taikabutsu Overseas,1995(3):48-53.
[7] 赵惠忠,李红,魏建修,汪厚植,慕松林,赵洪波.纳米Fe2O3对镁铬耐火材料烧结及力学性能的影响[J].耐火材料,2003(05):256-258.
[8] 李晓明.微粉与新型耐火材料[M].北京:冶金工业出版社,1997
[9] Toker N Y;Darken L S;Muan A .Equilibrium phase relations and thermodynamics of the Cr-O system in the temperature range of 1500℃ to 1825℃[J].Metallurgical and Materials Transactions,1991,22B(04):225-232.
[10] Lide D R.CRC Handbook of Chemistry and Physics[M].Boca Raton,Florida:CRC Press,2004
[11] 高永生,张鹏,崔军,田晓春.应用人工神经网络预测50CrV4钢的变形抗力[J].钢铁,1998(04):0.
[12] 王铁;陈进 .BP算法中学习率及形状因子对学习速度的综合影响[J].上海交通大学学报,1997,31(03):109-112.
[13] 王国栋;刘相华;吕程 等.人工智能在轧钢中的应用与性能预报[J].钢铁,2000,35(zk):24-31.
[14] Emling WH;Dawso S.Mold instrumentation for breakout detection and control[A].Washington:A Publication of the Iron and Steel Society,1991:197.
[15] Bellomo P;Palchetti M;Maria E S.Neural networks utilization for breakout monitoring[A].Nashville:A Publication of the Iron and Steel Society,1995:345.
[16] Hatanaka K;Tanaka T;Kominami H .Breakout forecasting system based on multiple neural networks for continuous casting in steel production[J].Fujit su Scientific and Technical Journal,1993,29(03):265.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%