借鉴前人实验数据,采用一定的数学方法,对轴承钢的热物性参数进行了研究.结果表明:GCr15轴承钢的液相线温度为1 465.7 ℃,固相线温度为1 328.4 ℃,零强度温度为1 380 ℃左右,零塑性温度为1 330 ℃左右;在固相区、液固两相区、液相区分别采用不同的公式进行处理,可使结果更加准确,还避免了奇异性.研究结果可为轴承钢连铸工艺有限元模拟提供基础.
参考文献
| [1] | Chen, W;Zhang, YZ;Zhang, CJ;Zhu, LG;Lu, WG;Wang, BX;Ma, JH .Thermo-mechanical simulation and parameters optimization for beam blank continuous casting[J].Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing,2009(1/2):58-63. |
| [2] | 陈家祥.连续铸钢手册[M].北京:冶金工业出版社,1991 |
| [3] | 祭程,朱苗勇,曹学欠,赵忠义,赵贺朝,赵丽华,李海龙.高碳合金钢连铸动态轻压下工艺控制技术的研究与应用[C].第七届中国钢铁年会论文集,2009:1545-1550. |
| [4] | Liguang ZHU;Wengang LU;Yihua HAN .Study on High Temperature Mechanical Properties of Bearing Steel GCr15[J].Materials Science Forum,2008(2):1101-1105. |
| [5] | 王从曾.材料性能学[M].北京:北京工业大学出版社,2001 |
| [6] | Mizukami H;Murakami K;Miyashita Y .Mechanical properties of continuously cast steel at high temperature[J].Testuto-Hagane,1977,63(z562) |
| [7] | Harste K .Untersuchungen zur schrumpfung und zur entstehung von mechanischen spannungen whrend der erstarrung und nachfolgender abkühlung zylindrischer blcke aus Fe-C-Legierungen[D].Clausthal:Technische Universitt Clausthal,1989. |
| [8] | Puehringer O M .Strand mechanics for continuous slab casting plants[J].Stahl Und Eisen,1976,96(06):279-284. |
| [9] | Kinoshita K;Emi T;Kasai M .Thermal elasto-plastic stress analysis of solidifying shell in ontinuous casting mold[J].Testuto-Hagane,1979,65(14):2022-2031. |
| [10] | Uehara M;Samarasekera I V;Brimacombe J K .Mathematical modeling of unbending of ontinuous cast steel slabs[J].Ironmaking and Steelmaking,1986,13(03):138-153. |
| [11] | Kozlowski P F;Thomas B G;Azzi J A et al.Simple constitutive equations for steel at high temperature[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1992,23(03):903-918. |
| [12] | Spitzer K H;Harste K;Weber B et al.Mathematical model for thermal tracking and on-line control in continuous casting[J].ISIJ International,1992,32(07):848-856. |
| [13] | Mazumdar D .A consideration about the concept of effective thermal conductivity in continuous casting[J].ISIJ International,1989,29(06):524-528. |
| [14] | Lait J E;Brimacombe J K;Weinberg F .Mathematical modeling of heat flow in the continuous casting of steel[J].Ironmaking and Steelmaking,1974,1(02):90-97. |
| [15] | Gabathuler J P;Weinberg F .Fluid flow into a dendritic array under forced convection[J].Metallurgical and Materials Transactions B:Process Metallurgy and Materials Processing Science,1983,14(04):733-741. |
| [16] | Pehlke R D;Jeyarajan A;Wada H .Summary of thermal properties for casting alloys and mold materials[NTIS-PB83-211003][R].National Science Foundation,Washington,United States,1982. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%