以南钢(南京钢铁股份有限公司)30 t精炼钢包为原型,在相似原理的基础上,通过水模型实验对钢包不同吹氩位置的合理性进行了研究.结果表明:采用单孔底吹时,最佳位置在距钢包底部中心0.55 R处.同时通过顶渣实验和喂丝点位置优化实验,确定了合适的吹氩量和合适的喂丝点位置,研究结果为优化吹氩工艺提供了依据.
参考文献
[1] | Sahai Y;Guthrie R l L .Hydrodynamics of gas stirred melts:Parr Ⅱ.Axlsymmetric flows[J].Metallurgical and Materials Transactions B:Process Metallurgy and Materials Processing Science,1982,13(02):203-211. |
[2] | 匡世波 .钢包炉内流动和混合过程的数值模拟[D].沈阳:东北大学,2003. |
[3] | 任三兵,陈义胜,黄宗泽,贺友多.大型钢包双孔吹氩最佳位置的探讨[J].包头钢铁学院学报,2003(03):193-197. |
[4] | Nakanishi K;Fujii T;Szekely J .Possible relationship between energy dissipation and agitation in steel processing operations[J].lronmaking and Steel-making,1975,2(03):193-197. |
[5] | 王立涛,薛正良,张乔英,李正邦.钢包炉吹氩与夹杂物去除[J].钢铁研究学报,2005(03):34-38,55. |
[6] | Castillejos A H;Salcudean M E;Brimacombe J K .Fluid flow and bath temperature destratification in gas-stirred ladles[J].Metallurgical and Materials Transactions B:Process Metallurgy and Materials Processing Science,1989,20(05):603-611. |
[7] | 崔荣峰,钱永辉,周俐.80 t圆柱形LF精炼炉的水模型和三维数值模拟的研究[J].特殊钢,2008(05):26-28. |
[8] | 朱苗勇;肖泽强.钢的精炼过程数学物理模拟[M].北京:冶金工业出版社,1998:123. |
[9] | Gupta D;Lahiri A K .A water model study of the flow asymmetry inside a continuous slab casting mold[J].Metallurgical and Materials Transactions B:Process Metallurgy and Materials Processing Science,1996,27(10):757-764. |
[10] | Wei P;Uemura K;Koyama S .Cold model experiment on entrapment of inclusions in steel by inert gas bubbles[J].Tetsu To Hagane-Journal of the Iron and Steel Institute of Japan,1992,78(08):1361-1368. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%