欢迎登录材料期刊网

材料期刊网

高级检索

根据低配碳直接还原—低温熔分工艺制备粒铁的技术思想,考察了渣相成分对熔分开始时间及熔分后铁收得率的影响.试验结果表明,随着CaO添加量的增加,球团熔分开始时间先减小后增加.当CaO添加量为2.0%时,熔分开始时间最短.n(C)/n(O)为0.8时,渣相熔点较低,流动性较好,有利于渣铁分离.综合考虑熔分时间、铁收得率及能耗等,实验室条件下的最佳工艺参数为n(C)/n(O) =0.8,CaO添加量为2.0%,反应时间40 min(熔分开始时间30 min+熔分时间10 min).该条件下铁收得率约为85%,铁粒中铁含量约为94%,金属化率达95%以上,可作为优质的电炉炼钢原料.

参考文献

[1] 高文星,董凌燕,陈登福,温良英.煤基直接还原及转底炉工艺的发展现状[J].矿冶,2008(02):68-73.
[2] 黄洁.谈转底炉的发展[J].中国冶金,2007(04):23-25,58.
[3] 刘征建,杨广庆,薛庆国,张建良,杨天钧.钒钛磁铁矿含碳球团转底炉直接还原实验研究[J].过程工程学报,2009(z1):51-55.
[4] Raymond James LONGBOTTOM;Oleg OSTROVSKI;Eungyeul PARK .Formation of Cementite from Titanomagnetite Ore[J].ISIJ International,2006(5):641-646.
[5] Lu W K;Huang D B .Paired straight hearth (PSH) furnaces for metal oxide reduction[P].US,60257879,2001-07-10.
[6] Stanley Sun .A study of kinetics and mechanisms of iron ore reduction in ore/coal pellets[D].McMaster,1997.
[7] KANG SUN;W.-K. LU .Mathematical Modeling of the Kinetics of Carbothermic Reduction of Iron Oxides in Ore-Coal Composite Pellets[J].Metallurgical and materials transactions. B, Process metallurgy and materials processing science,2009(1):91-103.
[8] Lu W K;Jiang X;Yang J L.Smelting reduction and direct reduction for alternative ironmaking[A].Shanghai:ICSTI'09,2009:12-17.
[9] Basak ANAMERIC;S. Komar KAWATRA .The Microstructure of the Pig Iron Nuggets[J].ISIJ International,2007(1):53-61.
[10] Yoshiaki IGUCHI;Satoshi ENDO .Reactions, Coalescence of Reduced Iron Particles, and Liberation of Carbon Particles in Carbon Composite Iron Ore Pellets[J].ISIJ International,2004(12):1999-2007.
[11] 黄宗泽,肖兴国,肖泽强.石墨还原CaO-SiO2-Al2O3-FeO-CaF2渣系中FeO的动力学[J].化工冶金,1994(04):283-288.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%