本文综述了快速凝固高强度高导电率铜合金的研究现状,并对将来的发展趋势作了展望。指出,快速凝固铜合金的凝固过程对合金的最终显微组织结构起重要作用,因而,对其进行深入细致的研究具有重要意义。
This paper has made a present situation review and a future development prospect of researches on rapidly solidified high-strength and high-conductivity copper alloys. It is pointed out that rapidly solidifcation process of copper alloys is a key factor to influence the final microstucture of alloys. Therefore, research on such field is very insignificant in the production of high-strength and high-conductiveity copper materials.
参考文献
[1] | M J Tenwick;A Davies.[J].Materials Science and Engineering,1997:A226-228. |
[2] | A Bell;H A Davies .[J].Materials Letters,1997,A226~228:1039-1041. |
[3] | A O Olofinjana;A Atrens .[J].Materials Letters,1997,31:87-92. |
[4] | X Zhou;Y NingQ Li .[J].Journal of Alloys and Compounds,1992,183:168-173. |
[5] | Y LI;S C Ng;L K Tan;D Lu .[J].Journal of Alloys and Compounds,1997,259:276-282. |
[6] | X Zhang;P M Kelly;A Atrens .[J].冶金材料学报,1993,41:2877-2885. |
[7] | L. K. Tan;Y. Li;S. C. Ng;L. Lu .Effects of rare earth additions on structures and properties of rapidly solidified copper alloys[J].Materials Science and Technology: MST: A publication of the Institute of Metals,1999(2):169-179. |
[8] | P Duwez;R H Willens;W.Klement .[J].Journal of Applied Physics,1960,31:1137. |
[9] | 沈宁福;汤亚力;关绍康 等.凝固理论进展与快速凝固[J].金属学报,1996,32:673. |
[10] | W Klement .Trans.of Metall[J].Sciety of AIME,1963,227:965. |
[11] | D.G.Morries;M A.Morries .[J].Acta Materialia,1987,35:2511-2522. |
[12] | W Klement .Trans. Of Metall[J].Society of AIME,1965,233:1180-1182. |
[13] | E M Savitsky et al.[J].Journal of the Less-Common Metals,1982,83:71-86. |
[14] | Y.Nishi;H Aoyagi.Titanium'80 Processing of 4th international conference on titanium[C].Kyoto Japan,1980:1419-1425. |
[15] | I Eerson et al.[J].Metal Powder Report,1990,11:741-743. |
[16] | J. M. Sainz-Borda;I. Gutierrez;F. Castro Fernandez;M. Fuentes;H. A. Davies;C. M. Sellars .Constitution, microstructure, and hardness of water atomised and hot isostatically consolidated copper alloy powders[J].Powder Metallurgy,1995(1):31-38. |
[17] | R P Singh;A Lawley et al.[J].Materials Science and Engineering,1991,A145:243-255. |
[18] | E Batawi;D G Morris .[J].Scripta Metallurgica et Materialia,1993,29:765-769. |
[19] | J.B.Correia;H A. Davies;C.M. Sellers .[J].Acta Materialia,197:177. |
[20] | E Batawi;D G Morris;M A Morris .[J].Materials Science and Technology,1990,6:692. |
[21] | M M Dadras;D G Morris .[J].Scripta Materialia,1998,38(02):199-205. |
[22] | J. Szablewski;B Kuznicka .[J].Materials Science and Technology,1991,7:407. |
[23] | L Amberg;U Balkmark et al.[J].Materials Science and Engineering,1986,83:115. |
[24] | L E Collins;J R Barry .[J].Materials Science and Engineering,1988,98:355. |
[25] | P Kelley;A Moran;W Palko.[J].Advances in Powder Metallurgy,1989:187-199. |
[26] | R H Cookey;J V Wood .[J].Metal Powder Report,1991,135:8-41. |
[27] | E Batawi;M A Morris;D G Morris .[J].Materials Science and Engineering,1998,98:161-164. |
[28] | 刘平,黄金亮,曹兴国.快速凝固高强度高导电Cu-Cr合金的组织和性能[J].兵器材料科学与工程,1999(01):12. |
[29] | 刘平;曹兴国 等.[J].中国有色金属学报,1999,2(01):241-246. |
[30] | 沈军;李振宇 等.[J].中国有色金属学报,1999,1(01):136-141. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%