欢迎登录材料期刊网

材料期刊网

高级检索

通过对涂层缺陷、涂层起泡、湿附着力等研究领域的回顾,讨论了涂层缺陷对腐蚀性介质离子在涂层中的传输行为、涂层失效、基体腐蚀行为等方面的影响.在此基础上,针对涂层缺陷研究现状中存在的一些未解决问题,提出了诸如计算机支持技术等可能的解决方法.

参考文献

[1] Iwona Smuga-Otto;Karol E. Szklarz .Developing a methodology for performance evaluation of metallic thermal spray coatings for oil and gas industry service[J].Materials Performance,1998(7):34-40.
[2] Notter I M;Gabe D R .[J].Corrosion Science,1993,34(05):851.
[3] Phorgotten Phenomena .Fillform corrosion on coated steel[J].Materials Performance,1998,5:67-68.
[4] Morcillo;M Simancas J .Effects of soluble salts on coating lifein atmospheric services[J].Journal of Protective Coatings and Linings,1997,14(09):40-52.
[5] Johnson;James R .Primary cause of coating failure[J].Materials Performance,1999,38(06):48-49.
[6] Dianran Yan;Jining He;Jianjun Wu;Wanqi Qiu Jing Ma .Corrosion behaviour of a plasma spraying Al2O3 ceramic coating in dilute HCl solution[J].Surface and Coatings Technology,1997(89):191-195.
[7] B Matthes;E Borszeit;J Aromaa et al.Corrosion performance of some titanium-based hard coatings[J].Surface and Coatings Technology,1991(49):489-495.
[8] J.R. Kosek;J.N. DuPont;A.R. Marde .Effect of Porosity on Resistance of Epoxy Coatings to Cold-Wall Blistering[J].Corrosion: The Journal of Science and Engineering,1995(11):861-871.
[9] Worsley D A;Williams D;Ling J S G .Mechanistic changes in cut-edge corrosion induced by variation of organic coating porosity[J].Corrosion Science,2001,43(12):2335-2348.
[10] H. Uchida;M. Yamashita .Pinhole defect evaluation of TiN films prepared by dry coating process[J].Vacuum: Technology Applications & Ion Physics: The International Journal & Abstracting Service for Vacuum Science & Technology,2000(1):321-329.
[11] 金元生;杨业元;罗淑云 .陶瓷涂层缺陷的超声显微观察[J].材料保护,1997,30(04):3-5.
[12] 童兆和;江福明;丁传贤;殷庆瑞 .扫描电声显微镜在涂层缺陷检测中的应用[J].无机材料学报,1992,7(03):345-349.
[13] Yang X F;Vang C;Tallman D E;Bierwagen G P C roll .S.G,Rohlik.W.Weatheringdegradation of a polyurethane coating[J].Polymer Degradation and Stability,2001,74(02):341-351.
[14] JAY J. SENKEVICH .Degradation of an alkyd polymer coating characterized by AC impedance[J].Journal of Materials Science,2000(6):1359-1364.
[15] Y G Kweon;C Coddet .Blistering mechanisms of thermally sprayed Zine andZinc-based coatings in seawater[J].Corrosion Science,1992,48(08):660-656.
[16] Deflorian F;Fedrizzi L .Characterization of protective organic coatingsby electrochemical impedance spectroscopy[J].Journal of Adhesion Science and Technology,1999,13(05):629-645.
[17] Roy D;simon G P;Forsyth .M.Blends of maleic-anhydride-grafted polyethylene with polyethylene for improved cathodic disbondment performance[J].Polymer International,50(10):1115-1123.
[18] 潘肇基.有机涂层湿附着力的研究[J].材料保护,1994(02):9.
[19] 王周成.Fe在双极有机涂层下的腐蚀和电化学行为研究[J].腐蚀科学与防护技术,1994(01):1.
[20] 王周成.离子选择性酚醛涂层对碳钢防腐蚀性能的研究[J].材料保护,1998(03):1.
[21] R. Rajagopalan;J.O. Iroh .CORROSION PERFORMANCE OF POLYANILINE-POLYPYRROLE COMPOSITE COATINGS APPLIED TO LOW CARBON STEEL[J].Surface Engineering,2002(1):59-63.
[22] Shrestha S;Neville A;Hodgkiess T .The effect of post-treament of a high-velocity oxy-fuel Ni-Cr-Mo-Si-B coating Part Ⅰ:Microstructure/corrosion behavior relationships[J].Journal of Thermal Spray Technology,2001,10(03):470-479.
[23] N. Kouloumbi;G. M. Tsangaris;S. T. Kyvelidis;G. C. Psarras .Composite coatings and their performance in corrosive environment[J].British Corrosion Journal,1999(4):267-272.
[24] 陈行琦;刘曙光;赵常新;张淑玲 .异氰酸酯改性环氧树脂漆耐蚀性能与结构[J].中国腐蚀与防护学报,1994,14(02):129-137.
[25] A A Ashary;R C Tucker Jr.Corrosion characteristics of several thermal spray cermet-coating/alloy[J].Surface and Coatings Technology,1991:78-82.
[26] M Fukumoto;Y Wada;M Umemoto;L Okane .Effect connection pores on the corrosion behavior of plasma sprayed alumina coatings[J].Surface and Coatings Technology,1989,39-40:711-720.
[27] S Cirolini;J H Harding;G Jacucci .Computer simulation of plasma-sprayed coatings.I.Coating deposition model[J].Surface and Coatings Technology,1991,48:137-145.
[28] 林昌健;院挺 .多重内反射红外光谱原位研究聚合物/金属界面水的动态行为[J].中国腐蚀与防护学报,1996,16(04):241-246.
[29] Sakagami J;Kubo S;Sekine K;Yamada M,Nakata K,Maruyama H.Development of a pulse heating hermographic NDT technique for detection of latent blister in corrosion protective coating on oil storage tank[A].,2001:554-559.
[30] Chuang T J;Nguyen T;Lee S .Micro-mechanic model for cathodic blister growth in painted steel[J].Journal of Coatings Technology,1997(71):85-85.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%