通过浸渍得到了聚酰胺酸薄膜,采用适当的方法对薄膜进行处理之后再进行热亚胺化得到聚酰亚胺薄膜.用DF-PM型动静摩擦系数精密测定装置考察所得到的聚酰亚胺薄膜的摩擦学性能.用SEM考察了聚酰亚胺薄膜的磨痕形貌和对偶Si3N4陶瓷球表面的转移膜的形貌.结果表明,聚酰亚胺薄膜在与Si3N4陶瓷球对磨时,由于在摩擦过程中,聚酰亚胺能够在对偶面上形成均匀的并且低剪切强度的转移薄膜,因此表现出了优异的减摩与抗磨性能.聚酰亚胺薄膜的摩擦和磨损行为主要取决于薄膜的制备条件.
参考文献
[1] | Rathanawan Magaraphan;Wittaya Lilayuthalert;Anuvat Sirivat .Preparation, structure, properties and thermal behavior of rigid-rod polyimide/montmorillonite nanocomposites[J].Composites science and technology,2001(9):1253-1264. |
[2] | Hsiao SH.;Chen YJ. .Structure-property study of polyimides derived from PMDA and BPDA dianhydrides with structurally different diamines[J].European Polymer Journal,2002(4):815-828. |
[3] | Niyogi S.;Adhikari B. .Preparation and characterization of a polyimide membrane[J].European Polymer Journal,2002(6):1237-1243. |
[4] | Park I S;Ahn E.C;YU J;Lee HY .Cohesive failure of the Cu/polyimide system[J].Materials Science and Engineering A,1999,282:137-144. |
[5] | I. Karamancheva;V. Stefov;B. Soptrajanov;G. Danev;E. Spasova;J. Assa .FTIR spectroscopy and FTIR microscopy of vacuum-evaporated polyimide thin films[J].Vibrational Spectroscopy: An International Journal devoted to Applications of Infrared and Raman Spectroscopy,1999(2):369-374. |
[6] | Wen-Li Qu;Tze-Man Ko .Studies of Dielectric Characteristics and Surface Energies of Spin-Coated Polyimide Films[J].Journal of Applied Polymer Science,2001(7):1642-1652. |
[7] | K. Fukushima;Y. Ikeda;T. Hayashi;N. Kikuchi;E. Kusano;A. Kinbara .Imidized organic thin films deposited on glass substrates[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2001(2):254-257. |
[8] | Madhu Dubey;S. K. Nema .Alloys of polyimides with varying degree of crosslinking through antimony salts: mechanical properties characterization[J].Polymer: The International Journal for the Science and Technology of Polymers,1999(21):5947-5951. |
[9] | Seo Y;Jung C;Jikei M;Kakimoto M .Preparation and surface observation by scanning probe microscope of C60-containing polyimide Langmuir-Blodget film[J].THIN SOLID FILMS,1997,311:272-276. |
[10] | Ramos MMD. .Theoretical study of metal-polyimide interfacial properties[J].Vacuum: Technology Applications & Ion Physics: The International Journal & Abstracting Service for Vacuum Science & Technology,2002(3/4):255-260. |
[11] | Indumathi J.;Ghosh A.K.;Fahim M.;Krishnaraj N.;Bijwe J. .Wear of cryo-treated engineering polymers and composites[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,1999(1):343-353. |
[12] | Liu W M;Yang S.R;Li C.L;Sun Y.M .Friction and wear behaviors of nitrogen ion-implanted polyimide against steel[J].Wear,1996,194:103-106. |
[13] | Kobayashi T;Nakao A;Iwaki M .Atructure and mechanical properties of amorphous-carbon films produced by high-fluence metallic ion implantation into polyimide[J].Surface and Coatings Technology,2002,399:158-159. |
[14] | Carton J F;Vannes A.B;Zambelli G;Vincent L .An investigation of the fretting behaviour of low friction conatings on steel[J].Tribology International,1996,29(06):445-455. |
[15] | T. Gradt;T. Schneider;W. Hubner .Friction and wear at low temperatures[J].International journal of hydrogen energy,1998(5):397-403. |
[16] | Ree M;Kim K;Woo S.H.H .Chang,Structure,chain orientation and properties in thin films of aromatic polyimides with various chain chain rigidities[J].Journal of Applied Physics,1997,81(02):698-708. |
[17] | Ree M;Chu C W;Goldberg M.J .Influence of chain rigidity,in-plane orientation,and thickness on residual stress of polymer films[J].Journal of Applied Physics,1994,75(03):1410-1419. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%